74LVC8T245BQ,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LVC8T245 |
| Pin Count | 24 |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 8.2 ns |
| Quiescent Current | 30μA |
| Turn On Delay Time | 8.9 ns |
| Family | LVC/LCX/Z |
| Logic Function | Transceiver, Translator |
| Data Rate | 420Mbps |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -32mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 32mA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.2V~5.5V |
| Voltage - VCCB | 1.2V~5.5V |
| Channels per Circuit | 8 |
| Length | 5.5mm |
| Width | 3.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LVC8T245BQ,118 Overview
Embedded in the 24-VFQFN Exposed Pad package, it is available for you to use.A package of Tape & Reel (TR) has been used.In its configuration, Tri-State, Non-Inverted is used as the output.There is Voltage Level translator type for this electrical device.Level translators is mounted according to the Surface Mount method.This electrical device has channel type Bidirectional.Operation is performed at -40°C~125°C TA.As part of the transmission line termination process, there are a total of 24 terminations.Level translators is possible to determine Level translatorss related parts using the base part number 74LVC8T245.In order to power the device, a voltage supply of 1.5V is required.Pin count is 24.This device belongs to the 74LVC series.With 24 pins, it is designed.The design of this electronic part is based on 1 bits.The maximum supply voltage is 5.5V.A minimal voltage of 1.2V is needed to operate it.1.2V~5.5V is the configuration of the VCCA supply rail.A VCCB supply rail is configured as 1.2V~5.5V.The mount method is Surface Mount.A BUS TRANSCEIVER logic IC is used.In transmission lines, there are 2 terminations, in which an impedance-matching device is used to end the line.LVC/LCX/Z is the family of this electronic device.Level translators consumes 30μA quiescent current and is not affected by external factors.This device contains 1 elements in its design.
74LVC8T245BQ,118 Features
24-VFQFN Exposed Pad package
24 pin count
74LVC series
24 pins
1 elements
74LVC8T245BQ,118 Applications
There are a lot of Nexperia USA Inc. 74LVC8T245BQ,118 voltage translators & level shifters applications.
- Personal Electronics
- Monitors
- I2C / SMBus
- SMBus
- PMBus
- UART
- GPIO
- Infotainment Head Unit
- TVs
- Tablet
