74LVCH16374APAG
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 48 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 150MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Load Capacitance | 50pF |
| Element Configuration | Dual |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 4.5 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 6.1 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Number of Bits per Element | 8 |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Clock Edge Trigger Type | Positive Edge |
| Capacitance - Input | 4.5pF |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74LVCH16374APAG Overview
In the form of TSSOP, it has been packaged. In total, there are 2 elements. A total of 48terminations have been recorded. Power is provided by a 3.3V supply. Devices in the LVC/LCX/Zfamily are electronic devices. There is an electronic part mounted in the way of Surface Mount. There are 48pins on it. In this device, the clock edge trigger type is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. An electronic part designed with 16bits is used in this application. Using 1 circuits, it is highly flexible. There are 2 ports embedded in the flip flops. Optimal efficiency requires a supply voltage of 3.3V. There is a consumption of 10μAof quiescent current from it. A -24mAvalue is set for the high level output current. Low level output current is set to 24mA. Ideally, the operating temperature should be below 85°C. Temperatures above -40°Cshould be used. The system operates with a minimum supply voltage of 2.7V. 3.6Vis the maximum supply voltage supported by it. A frequency of 150MHzcan be achieved. It uses the logic IC BUS DRIVER. There are 2 functions available on this T flip flop. 48pins are available on this JK flip flop.
74LVCH16374APAG Features
48 pins
16 Bits
2 Functions
48 pin count
74LVCH16374APAG Applications
There are a lot of Integrated Device Technology (IDT) 74LVCH16374APAG Flip Flops applications.
- Computers
- Data transfer
- ESD protection
- Bounce elimination switch
- Data storage
- Cold spare funcion
- Functionally equivalent to the MC10/100EL29
- Count Modes
- Individual Asynchronous Resets
- Consumer
