74LVCH1T45GS,132
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFDFN |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVCH |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Max Power Dissipation | 250mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.35mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LVCH1T45 |
| Output Type | Tri-State, Non-Inverted |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 5.1 ns |
| Quiescent Current | 16μA |
| Family | LVC/LCX/Z |
| Logic Function | Transceiver, Translator |
| Data Rate | 420Mbps |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -32mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 32mA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.2V~5.5V |
| Voltage - VCCB | 1.2V~5.5V |
| Height Seated (Max) | 0.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LVCH1T45GS,132 Overview
6-XFDFN contains it.This package has the format of Tape & Reel (TR).This output is configured with Tri-State, Non-Inverted.There is a translator type of Voltage Level for this electrical device.The electronic part is mounted in a way that corresponds to Surface Mount.In this electrical device, the Channel type is Bidirectional.The operating temperature is -40°C~125°C TA.Transmission lines can be terminated using 6 terminations to end them.Parts related to a base part number 74LVCH1T45 are designated by the same number.This device is powered by a supply voltage of 1.5V which is applied to it.This is a device from the 74LVCH series.The 6 pins are designed into it.1 Bits are used in the design of this electronic part.The supply voltage is limited to 5.5V.1.2V is its minimum supply voltage.VCCA is configured with a supply rail that starts at 1.2V~5.5V.1.2V~5.5V is the supply rail configuration on the VCCB.With the Surface Mount method, it is mounted.Level translators is 1 channels.There is BUS TRANSCEIVER logic IC in it.Typically, 2 transmission lines are terminated with an impedance-matching device that matches the characteristic impedance of the line.In terms of electronic devices, this one is in the LVC/LCX/Z family.Level translators consumes 16μA quiescent current and is not affected by external factors.
74LVCH1T45GS,132 Features
6-XFDFN package
74LVCH series
6 pins
74LVCH1T45GS,132 Applications
There are a lot of Nexperia USA Inc. 74LVCH1T45GS,132 voltage translators & level shifters applications.
- Desktop PC
- Routers (Telecom Switching Equipment)
- Industrial equipment
- One Fabrication Site
- TVs
- Controlled Baseline
- One Assembly and Test Site
- Monitors
- Signaling Level Conversion for Clock or Data
- Automotive infotainment
