74VHC112N
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74VHC |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | JK Type |
| Terminal Finish | NOT SPECIFIED |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Function | Set(Preset) and Reset |
| Qualification Status | COMMERCIAL |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 185MHz |
| Family | AHC/VHC |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 8mA 8mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 10.5ns @ 5V, 50pF |
| Trigger Type | Negative Edge |
| Input Capacitance | 4pF |
| Height Seated (Max) | 5.08mm |
| RoHS Status | ROHS3 Compliant |
74VHC112N Overview
The package is in the form of 16-DIP (0.300, 7.62mm). It is included in the package Tube. In the configuration, Differentialis used as the output. JK flip flop uses Negative Edgeas the trigger. This electronic part is mounted in the way of Through Hole. A 2V~5.5Vsupply voltage is required for it to operate. Temperature is set to -40°C~85°C TA. It is an electronic flip flop with the type JK Type. It is a type of FPGA belonging to the 74VHC series. You should not exceed 185MHzin its output frequency. A total of 2elements are present in it. As a result, it consumes 2μA quiescent current and is not affected by external forces. A total of 16terminations have been recorded. It is powered from a supply voltage of 3.3V. The input capacitance of this T flip flop is 4pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. This D flip flop belongs to the family of AHC/VHC. In this case, the maximum supply voltage (Vsup) reaches 5.5V. For normal operation, the supply voltage (Vsup) should be above 2V.
74VHC112N Features
Tube package
74VHC series
74VHC112N Applications
There are a lot of Rochester Electronics, LLC 74VHC112N Flip Flops applications.
- CMOS Process
- Modulo – n – counter
- Guaranteed simultaneous switching noise level
- Buffered Clock
- Safety Clamp
- Storage Registers
- Patented noise
- ESD performance
- Counters
- Digital electronics systems
