74VHC139MTC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 173mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1999 |
| Series | 74VHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Subcategory | Decoder/Drivers |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Base Part Number | 74VHC139 |
| Number of Outputs | 4 |
| Circuit | 1 x 2:4 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 1 |
| Load Capacitance | 50pF |
| Throw Configuration | DP4T |
| Propagation Delay | 16.5 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 16.5 ns |
| Family | AHC/VHC |
| Logic Function | Decoder, Demultiplexer, Demux |
| Current - Output High, Low | 8mA 8mA |
| Supply Type | Single |
| Max I(ol) | 0.008 A |
| Number of Input Lines | 2 |
| Voltage Supply Source | Single Supply |
| Height | 900μm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74VHC139MTC Overview
Providing this information in the 16-TSSOP (0.173, 4.40mm Width) enables digital switch board space to be saved.Tube is the packaging method.In terms of mounting, digital switch ic uses the Surface Mount method .The analog IC in the multiplexers is identified as Decoder/Demultiplexer.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.Using a 2V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.Several applications are possible for 74VHC series multiplexers.It is designed with 16 terminations as part of its basic configuration.There is a base part number of 74VHC139 which can also be used in order to locate the logic switch that are related to this item.The multiplexer is supplied with 3.3V voltage.GULL WING represents the end of conductors.There is a type of supply Single that is employed in this case.Currently, it is configured with 16 pins.Surface Mount is the way it is mounted.Among the family of AHC/VHC the logic switch is a member.Vsup should be kept at 2V to prevent some unnecessary failures.Avoid unnecessary failures by keeping Vsup at 5.5V.The turn signal switch contains 4 outputs designed to operate.I would classify the digital switch ic as an electronic part belonging to the Decoder/Drivers category.In the absence of external influences, it consumes 4μA current of multiplexer ic.For the purpose of accepting voltage levels, the multiplexers have 2 input lines.A normal operation of the digitalswitch requires 1 circuits.
74VHC139MTC Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
2 input lines
74VHC139MTC Applications
There are a lot of ON Semiconductor 74VHC139MTC Signal Switches / Multiplexers / Decoders applications.
- PCIe
- Telephone network
- Decimal decoder
- Medical industry
- Data distribution
- Microprocessor instruction decoding
- Electronically controlled engine system
- Data bus control
- A robotic vehicle with the metal detector
- RF-based home automation system
