Parameters |
Mounting Type |
Surface Mount |
Package / Case |
8-XFLGA |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-55°C~125°C |
Packaging |
Tape & Reel (TR) |
Published |
2014 |
JESD-609 Code |
e4 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
Type |
Bus Switch |
Resistance |
70Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Power Dissipation |
274mW |
Voltage - Supply |
4V~5.5V |
Terminal Position |
BOTTOM |
Terminal Form |
BUTT |
Number of Functions |
2 |
Supply Voltage |
4.5V |
Terminal Pitch |
0.4mm |
Base Part Number |
7WBD3305 |
Pin Count |
8 |
Operating Supply Voltage |
5V |
Number of Elements |
2 |
Circuit |
1 x 1:1 |
Supply Voltage-Min (Vsup) |
4V |
Number of Ports |
2 |
Number of Bits |
1 |
Propagation Delay |
250 ps |
Quiescent Current |
1mA |
Turn On Delay Time |
4.8 ns |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Halogen Free |
Halogen Free |
Supply Type |
Single |
Output Polarity |
TRUE |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Voltage Supply Source |
Single Supply |
Height Seated (Max) |
0.4mm |
Length |
1.6mm |
Width |
1mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
7WBD3305BMX1TCG Overview
This is a relatively small item of digital switch that is included in the 8-XFLGA in order to save space on the board.The package is packaged in accordance with Tape & Reel (TR).digital switch ic uses the method of Surface Mount for mounting.In the multiplexers, the analog IC is indicated by Bus Switch.The operating temperature will not be affected by external factors when turn signal switch is set to -55°C~125°C.Designers have greater flexibility using digital controlled switch when it works with 4V~5.5V voltage.It is designed with 8 terminations as part of its basic configuration.The base part number is 7WBD3305, which can also be used to find its logic switch related parts.The turn signal switch is supplied with a voltage of 4.5V volts.This turn signal switch has a total of 8 component pins.As a result, BUTT represents the end of the conductors.There is a type of supply Single that is employed in this case.A total of 8 pins are configured on this board.I would like to refer to the logic switch as a member of the CBT/FST/QS/5C/B family.Signal multiplexer consists of 1 bits.The minimal supply voltage (Vsup) should be kept at 4V to avoid some unnecessary failures.In the absence of external influences, it consumes 1mA current of multiplexer ic.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.The system operates with a resistance of 2.The system operates with a resistance of 70Ohm.The mux switch configuration contains 2 elements.
7WBD3305BMX1TCG Features
Supplied in the 8-XFLGA package
Adopting a supply type of Single
Operating with the supply voltage of 5V
7WBD3305BMX1TCG Applications
There are a lot of ON Semiconductor 7WBD3305BMX1TCG Signal Switches / Multiplexers / Decoders applications.
- Make full adder
- Audio transmission
- LVDS
- Combinational circuit
- Used to connect a single source to multiple destinations
- Analog to digital conversion
- Arithmetic Logic Units
- To select different devices in microprocessor output
- Relay
- Enabling different functions units in microprocessor instruction decoding