93LC56B-I/SN
| Parameters | |
|---|---|
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Technology | CMOS |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 93LC56B |
| Pin Count | 8 |
| Operating Supply Voltage | 2.5V |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Interface | Serial |
| Memory Size | 2Kb 128 x 16 |
| Nominal Supply Current | 2mA |
| Memory Type | Non-Volatile |
| Clock Frequency | 2MHz |
| Access Time | 250 ns |
| Memory Format | EEPROM |
| Memory Interface | SPI |
| Output Characteristics | 3-STATE |
| Write Cycle Time - Word, Page | 6ms |
| Density | 2 kb |
| Standby Current-Max | 0.000001A |
| Serial Bus Type | MICROWIRE |
| Endurance | 1000000 Write/Erase Cycles |
| Write Cycle Time-Max (tWC) | 6ms |
| Data Retention Time-Min | 200 |
| Write Protection | SOFTWARE |
| Ambient Temperature Range High | 125°C |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
93LC56B-I/SN Overview
A Non-Volatile-type memory can be classified as the memory type of this device. It is supplied votage within Tube. As you can see, it is embedded in 8-SOIC (0.154, 3.90mm Width) case. A memory chip with a capacity of 2Kb 128 x 16 is used on this device. Memory data is stored in EEPROM-format, which is common in mainstream devices. With an extended designed operating temperature of -40°C~85°C TA, this device is capable of lots of demanding applications. The device is capable of handling a supply voltage of 2.5V~5.5V volts. It is recommended to mount it in the Surface Mount mounting type. There are 8 terminations on the chip. The comprehensive working procedure is supported by 1 functions in this part. In order to function properly, this ic memory chip should be powered by a voltage of 5V. It is important to note that the memory has a clock frequency rotation within the range of 2MHz. Similar parts are frequently selected using the ic memory chip's base part number, 93LC56B. The memory device is enclosed in a package with an 8-pin connector. This memory device has 8 pins, indicating it has 8 memory locations. This memory runs on an 2.5V operating supply voltage. In this chip, the Surface Mount mounting method is used, a straightforward, high-efficiency mounting method. This memory chip is rated 2mA for its nominal supply current. This memory chip requires a mere 3/5V of power. Data is carried and transferred to the CPU by the MICROWIRE-type serial bus this memory integrates with.
93LC56B-I/SN Features
Package / Case: 8-SOIC (0.154, 3.90mm Width)
8 Pins
Operating Supply Voltage:2.5V
93LC56B-I/SN Applications
There are a lot of Microchip Technology 93LC56B-I/SN Memory applications.
- hard disk drive (HDD)
- networking
- nonvolatile BIOS memory
- DVD disk buffer
- networks
- mainframes
- telecommunications
- supercomputers
- embedded logic
- eSRAM
