9DB833AGLF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 48 |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Clock Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.465V |
| Min Supply Voltage | 3.135V |
| Nominal Supply Current | 170mA |
| Frequency (Max) | 166MHz |
| Family | 9DB |
| Output Characteristics | 3-STATE |
| Input | HCSL |
| Logic IC Type | PLL BASED CLOCK DRIVER |
| PLL | Yes |
| Same Edge Skew-Max (tskwd) | 0.06 ns |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
9DB833AGLF Overview
A TSSOP-serial number is attached to the packaging of this product, which is packaged in a case. 48 terminations are found in it. Parts provide 3.3V volts. To run 260, we use the peak reflow temperature of this part. 1 are present on the device. Clock program is normalfor the operation frequency to be 166MHz. A total of 2006 publications have been made of the part. Surface Mount is recommended for mounting. 48 pins are present on the device. The board has 48 pins. Temperatures below 0°C are not permitted for this device. Circuits application is recommended to operate at a temperature lower than 70°C. 3.3V should be the supply voltage. Devices in this family belong to the Clock Drivers series. There is a possibility that the device will be able to maintain 8 outputs. A supply voltage of 3.465V is used for this part. Ensure that the supply voltage is greater than 3.135V. You can search for parts associated with the 9DB family based on the part number. PLL BASED CLOCK DRIVER logic ICs are used.
9DB833AGLF Features
Peak Reflow Temperature (Cel): 260
Include 1 Circuits
with 48 Pins
operate supply voltage at the range of 3.3V
Logic IC Type: PLL BASED CLOCK DRIVER
9DB833AGLF Applications
There are a lot of Integrated Device Technology (IDT) 9DB833AGLF application specific timer?applications.
- Ethernet switch/router
- MSAN/DSLAM/PON
- Servers
- Test and Measurement
- Communications
- DSLAM
- Printers, scanners, projectors
- Fibre Channel, SAN
- BBU (Baseband Unit)
- Printers
