A3955SLBTR-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerSOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -20°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1999 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Additional Feature | ALSO REQUIRES 5V TO 50V VBB SUPPLY |
| Subcategory | Motion Control Electronics |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | A3955 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 50V |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Output Configuration | Half Bridge (2) |
| Current - Output | 1.5A |
| Supply Current-Max (Isup) | 50mA |
| Voltage - Load | 4.5V~50V |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1, 1/2, 1/4, 1/8 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
A3955SLBTR-T Overview
The package contains [0].Drivers controllers is packaged wDrivers controllersh a 16-PowerSOIC (0.295, 7.50mm Width) case.In most cases, it is recommended to mount the part at Surface Mount.In this case, it is appropriate for the component connected to General Purpose.4.5V~5.5V volts can be supplied by the device.Drivers controllers operates wDrivers controllershin a range of -20°C~150°C TJdegrees Celsius.There are 16 terminations available on this part.If the voltage is applied to the load at the rate of [0], the load will be affected.This amplifier should be operated at 5V.There is a recommended mounting method of Surface Mount.Ensure that the part output current remains at 1.5A.An analog IC with the model number STEPPER MOTOR CONTROLLERis employed in the device.As a result of the A3955part number, it can be found.16pins are present on the device.Drivers controllers belongs to the series [0].1outputs are available in total.There is 5V supply voltage required for this driver.A voltage of 50Vis maintained at the output.The characteristic of ALSO REQUIRES 5V TO 50V VBB SUPPLYis also present.
A3955SLBTR-T Features
Applications : General Purpose
Load voltage across the chip 4.5V~50V
base on A3955 number
designed with 1 outputs
Additional Feature: ALSO REQUIRES 5V TO 50V VBB SUPPLY
A3955SLBTR-T Applications
There are a lot of Allegro MicroSystems A3955SLBTR-T motor drivers applications.
- Arena lighting
- General lighting
- Commercial office
- Automotive exterior and interior lighting
- Dome
- Home lighting systems
- Industrial high-bay lights
- LED bias
- Digital still cameras
- Matrix LED dimmers
