A3964SLB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Operating Temperature | -20°C~150°C TJ |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | A3964 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Output Configuration | Half Bridge (4) |
| Current - Output | 800mA |
| Supply Current-Max (Isup) | 85mA |
| Voltage - Load | 5V~30V |
| Motor Type - Stepper | Bipolar |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
A3964SLB Overview
This package was designed with Tubein mind.There is 20-SOIC (0.295, 7.50mm Width) case included with the part.A mounting position of Surface Mountis recommended for the part.I believe it would be suitable for the component connected to General Purpose.Drivers controllers is capable of supplying 4.75V~5.25V volts.A range of -20°C~150°C TJis available for operating temperature.A total of 20terminations are available in the part.The voltage can applied to the load at the rate of 5V~30V.Please take in mind that this amplifier should be run at 5V.In terms of mounting, it is recommended that it be mounted in Surface Mount.Maintain a 800mAoutput current for the part.There is an analog integrated circuit STEPPER MOTOR CONTROLLERpresent in the device.According to the A3964part number, the part is found.Drivers controllers belongs to the Motion Control Electronics series.There are 1 outputs available.
A3964SLB Features
Applications : General Purpose
Load voltage across the chip 5V~30V
base on A3964 number
designed with 1 outputs
A3964SLB Applications
There are a lot of Allegro MicroSystems A3964SLB motor drivers applications.
- Camera-enabled smartphones
- Large outdoor LED display
- Charge pump circuits
- LED ballasts
- Turn signals
- drivers for outdoor application
- LED bias
- Arena lighting
- AM radio
- A cross between entertainment
