A6276SLW-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | COMMON-ANODE |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | A6276 |
| Pin Count | 24 |
| Number of Outputs | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 32mA |
| Output Current | 75.5mA |
| Voltage - Output | 4V |
| Topology | Shift Register |
| Output Current per Channel | 75.5mA |
| Internal Switch(s) | Yes |
| fmax-Min | 10 MHz |
| Number of Segments | 16 |
| Voltage - Supply (Min) | 4.5V |
| Multiplexed Display Capability | NO |
| Display Mode | SEGMENT |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
A6276SLW-T Overview
In order to save board space, the led driver uses the 24-SOIC (0.295, 7.50mm Width) package. LED drivers have a total of 16 outputs that are used in the design of the drivers.Surface Mount is used for mounting the led light driver.With high reliability and efficiency, this emerges as a Linear.If the led driver ic is set to -20°C~85°C TA, it will work normally.The system operates at a frequency of 20MHz.A termination of 24 is used to operate the LED driver.The base is configured with 24 pins.If the voltage supply is lower than 4.5V, undetermined failures may occur.The segment count is 16.I have mounted it by Surface Mount.A6276 is the base part number for this LED driver.Ideally, the supply voltage should be 5.5V.This device has an output voltage of 4V volts.There are 24 pins on this device.In addition, it can also be categorized into Display Drivers based on its characteristics.In order to achieve highest efficiency standards, the supply voltage must be very low, preferably at 4.5V.75.5mA is the maximum current the load can handle.In addition, this LED driver has a COMMON-ANODE characteristic.
A6276SLW-T Features
Available in the 24-SOIC (0.295, 7.50mm Width) package
Operating temperature of -20°C~85°C TA
Frequency of 20MHz
Supply voltage of 5V
COMMON-ANODE
A6276SLW-T Applications
There are a lot of Allegro MicroSystems A6276SLW-T LED Driver ICs applications.
- Museum lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Flicker-free LED Lighting using R1580N
- Amusement Machines
- LED Lighting PFCs, Linear Dimmable
- A- lamps
- Scanners and Handy Terminals
- LED Lightings for Industrial Equipment
- Other Electronic Devices
- LED Lightings for Inspection Devices
