A6595KA
| Parameters | |
|---|---|
| Subcategory | Peripheral Drivers |
| Technology | NMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | A6595 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Voltage | 50V |
| Output Type | N-Channel |
| Max Output Current | 750mA |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Interface | Strobe, Serial |
| Output Configuration | Low Side |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Propagation Delay | 650 ns |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Output Current per Channel | 250mA |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 50V Max |
| Driver Number of Bits | 8 |
| Output Peak Current Limit-Nom | 2A |
| Rds On (Typ) | 1.3 Ω |
| Height Seated (Max) | 5.33mm |
| Length | 25.905mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 1.3Ohm |
| Terminal Finish | TIN LEAD |
A6595KA Overview
The LED driver's packaged as a Tube.This package is included in 20-DIP (0.300, 7.62mm).This LED driving board is mounted using the mounting type Through Hole.There is a switch type of Latched Driver.To ensure reliable operation, set the temperature to -40°C~125°C TA.There are 8 outputs available on this lighting driver.In order to operate, it requires a voltage supply of 4.5V~5.5V.There is a maximum output voltage of N-Channel volts.The A6595 family consists of this type.It contains 20 terminations.20 pins are used for operation.There are 1 functions of the LED driver.The maximum output current is reduced to 750mA to meet the operation criteria.High efficiency is possible when the supply voltage is set to 5V.The lighting driver is mounted in the way of Through Hole.The LED driver has a total of 20 pins.Currently, the LED driving board has 1.3Ohm resistance.In this case, the output current is set to 250mA.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.This part is powered by 5V.When using this LED driving board, it is recommended that the supply voltage is set to 5V.A total of 1 elements can be found.
A6595KA Features
Supplied from 5V
Resistance of 1.3Ohm
A6595KA Applications
There are a lot of Allegro MicroSystems A6595KA Power Switches ICs applications.
- USB Protection
- Solid-State Drives
- Portable Video Game Players
- Wireless/Networking Cards
- Hot Swaps
- Wireless Modem Data Cards
- PDAs
- PC Card Hot Swap
- Notebook and Tablet Computers
- Storage (HDDs, SSDs)
