A6810SLW
| Parameters | |
|---|---|
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | CAN ALSO OPERATE WITH 5V LOGIC SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | A6810 |
| Pin Count | 20 |
| Number of Outputs | 10 |
| Qualification Status | Not Qualified |
| Output Voltage | 58.3V |
| Output Type | Bipolar |
| Max Output Current | 40mA |
| Power Supplies | 3.3/560V |
| Interface | Strobe, Serial |
| Output Configuration | High Side |
| Output Current | 15mA |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Supply Current-Max | 4mA |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Output Characteristics | TOTEM-POLE |
| Output Current per Channel | 25mA |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:10 |
| Input Characteristics | STANDARD |
| Voltage - Load | 60V Max |
| Supply Voltage1-Nom | 60V |
| Number of Segments | 10 |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e0 |
A6810SLW Overview
It's?packaged?in?the way?of?a?Tube.There is a package for it in the 20-SOIC (0.295, 7.50mm Width) package.The lighting driver has the mounting type Surface Mount.There is a switch type of Latched Driver.It is recommended to set the temperature to -20°C~85°C TA in order to ensure reliable operation.The LED driver has a total of 10 outputs.Operation is based on a supply voltage of 3V~5.5V.A maximum output voltage of Bipolar volts can be obtained with this LED driver.The A6810 family consists of this type.It contains 20 terminations.The 20 pins are used to operate the LED driver.It has 1 functions.It is necessary to reduce the maximum output current to 40mA to meet the operation criteria.High efficiency is possible when the supply voltage is set to 3.3V.Surface Mount is mounted in the way of this lighting driver.There are 20 pins in total on this board.In this case, the output current will be set to 15mA.Self-contained in an econtainer with a capacity of Display Drivers, this LED driver is self-contained.It has a power supply of 3.3/560V.Using this LED driver, it is also possible to produce CAN ALSO OPERATE WITH 5V LOGIC SUPPLY.
A6810SLW Features
Supplied from 3.3V
Additional features like CAN ALSO OPERATE WITH 5V LOGIC SUPPLY
A6810SLW Applications
There are a lot of Allegro MicroSystems A6810SLW Power Switches ICs applications.
- Various applications equipped with buttons
- PDAs
- PC Cards
- Storage (HDDs, SSDs)
- Wearable Devices
- Wireless/Networking Cards
- Portable/Handheld Devices
- Hot-Swap Systems
- Low Voltage I/O System Power
- USB3.1 Power Delivery
