A6818EEPTR-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CAN ALSO OPERATE WITH 5V LOGIC SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | A6818 |
| Pin Count | 44 |
| Number of Outputs | 32 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 40mA |
| Power Supplies | 3.3/560V |
| Interface | Strobe, Serial |
| Output Configuration | High Side |
| Output Current | 15mA |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Supply Current-Max | 9mA |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Output Current per Channel | 25mA |
| Ratio - Input:Output | 1:32 |
| Voltage - Load | 60V Max |
| fmax-Min | 10 MHz |
| Supply Voltage1-Nom | 60V |
| Number of Segments | 32 |
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Height Seated (Max) | 4.57mm |
| Length | 16.59mm |
| Width | 16.59mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
A6818EEPTR-T Overview
The LED driver's packaged as a Tape & Reel (TR).There is a package for it in the 44-LCC (J-Lead) package.A Surface Mount mounting is used for the LED driving board.This switch is of type Latched Driver.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.As a default, the output is set to 32.A supply voltage of 3V~5.5V is required for it to operate.There is a maximum output voltage of Bipolar volts on this LED driver.It comes under the family of A6818.A total of 44 terminations can be found in it.During operation, the 44 pins are used.The LED driving board has a total of 1 functions.This operation requires the maximum output current to be decreased to 40mA.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.In this case, it is mounted in the way of Surface Mount.A total of 44 pins are present on it.This case has the output current set to 15mA.The LED driver is packaged in an econtainer with a capacity of Display Drivers.In this part, the power supply is set to 3.3/560V.Through the use of this lighting driver, we can also produce CAN ALSO OPERATE WITH 5V LOGIC SUPPLY.
A6818EEPTR-T Features
Supplied from 3.3V
Additional features like CAN ALSO OPERATE WITH 5V LOGIC SUPPLY
A6818EEPTR-T Applications
There are a lot of Allegro MicroSystems A6818EEPTR-T Power Switches ICs applications.
- Portable Devices
- Hot Swap
- Storage (HDDs, SSDs)
- Wireless Modem Data Cards
- Wireless/Networking Cards
- Various applications equipped with buttons
- USB Power Distribution
- PC Cards
- Hot Swaps
- Solid-State Drives
