A6821SA-T
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Technology | BIMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | A6821 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Voltage | 50V |
| Output Type | Bipolar |
| Max Output Current | 500mA |
| Polarity | NPN |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | Strobe, Serial |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 50V Max |
| Driver Number of Bits | 8 |
| Switching Frequency | 10MHz |
| Height Seated (Max) | 5.33mm |
| Length | 19.05mm |
| Width | 7.62mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
A6821SA-T Overview
It is packaged in the form of a Tube.This file is included in package 16-DIP (0.300, 7.62mm).This LED driving board is mounted using the mounting type Through Hole.Latched Driver is the switch type it owns.To ensure reliable performance, the temperature should be set to -20°C~85°C TA.By default, it is set to output 8.Operation is based on 3V~5.5V supply voltage.Voltage output is Bipolar volts at maximum.As you can see, it comes from the A6821 family.There are 16 terminations in it.For operation, 16 pins are used.It consists of 1 functions.This operation requires the maximum output current to be decreased to 500mA.It is possible to obtain high efficiency with a supply voltage of 3.3V.Through Hole is mounted in the way.The LED driver has a total of 16 pins.When this is the case, the output current is set to 500mA.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.Normal operation requires Vsup above 3V.This part has a power supply of 3.3/5V volts.It has a maximum input voltage of 5.5V volts.A voltage of 3V volts is the minimum input voltage.
A6821SA-T Features
Supplied from 3.3V
A6821SA-T Applications
There are a lot of Allegro MicroSystems A6821SA-T Power Switches ICs applications.
- Portable Devices
- Gaming
- Portable GPS Device
- USB3.1 Power Delivery
- Portable Video Game Players
- Set-top-box
- PDAs
- Wearable Devices
- Wireless/Networking Cards
- Portable/Handheld Devices
