A6833SEP-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Peripheral Drivers |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | A6833 |
| Pin Count | 44 |
| Number of Outputs | 32 |
| Qualification Status | Not Qualified |
| Output Voltage | 30V |
| Output Type | Bipolar |
| Max Output Current | 125mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | Strobe, Serial |
| Output Configuration | Low Side |
| Output Current | 125mA |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Ratio - Input:Output | 1:32 |
| Voltage - Load | 30V Max |
| Height Seated (Max) | 4.57mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
A6833SEP-T Overview
Tube is the way it's packaged.In the 44-LCC (J-Lead) package, it is included.Mounting type Surface Mount is selected for the LED driving board.It owns the Latched Driver switch type.It is recommended to set the temperature to -20°C~85°C TA in order to ensure reliable operation.The LED driver is equipped with 32 outputs.The LED driving board operates at 3V~5.5V volts.It has a maximum output voltage of Bipolar volts.The A6833 family consists of this type.As a result, there are 44 terminations.The 44 pins are used for the operation of the system.It has 1 functions.It is necessary to reduce the maximum output current to 125mA to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.This lighting driver is mounted in the way of Surface Mount.In total, it has 44 pins.The output current is set to 125mA in this case.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.The maximum supply voltage for this LED driver is 5.5V (Vsup).In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 3V.This part has a power supply of 3.3/5V volts.
A6833SEP-T Features
Supplied from 3.3V
A6833SEP-T Applications
There are a lot of Allegro MicroSystems A6833SEP-T Power Switches ICs applications.
- Smartphone and PDA
- Portable/Handheld Devices
- Hot-Swap Systems
- Various applications equipped with buttons
- Wireless Modem Data Cards
- Hot Swap
- HDD and SSD
- Low Voltage I/O System Power
- USB Power Distribution
- Solid State Drivers
