A6B595KA-T
| Parameters | |
|---|---|
| Voltage - Load | 50V Max |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 5.5 Ω |
| Built-in Protections | TRANSIENT |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 5.33mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Resistance | 5.5Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | A6B595 |
| Pin Count | 18 |
| Number of Outputs | 8 |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Interface | Strobe, Serial |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Propagation Delay | 150 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 150 ns |
| Switch Type | Latched Driver |
| Output Current per Channel | 150mA |
| Ratio - Input:Output | 1:8 |
A6B595KA-T Overview
As a result, it is packaged in the form of a Tube.There is a package for it in the 18-DIP (0.300, 7.62mm) package.Through Hole is the mounting type of the LED driver.Latched Driver is the switch type that it owns.Keeping the temperature at -40°C~85°C TA ensures reliable operation.In this LED driver, there are no outputs available.To operate, it needs a supply voltage of 4.5V~5.5V.It has a maximum output voltage of N-Channel volts.It is part of the A6B595 family of LED drivers.It contains 18 terminations.20 pins are used for operation.It consists of 1 functions.The maximum output current is reduced to 500mA to meet the operation criteria.High efficiency is possible when the supply voltage is set to 5V.The LED driving board is mounted in the way of Through Hole.There are 18 pins in total on this board.Currently, the LED driving board has 5.5Ohm resistance.In order to achieve the best efficiency, the supply voltage should be set to 5V.In total, there are 1 elements that make up this list.
A6B595KA-T Features
Supplied from 5V
Resistance of 5.5Ohm
A6B595KA-T Applications
There are a lot of Allegro MicroSystems A6B595KA-T Power Switches ICs applications.
- Wearable Devices
- Hot Swap
- HDD and SSD
- Solid-State Drives
- USB Protection
- Portable GPS
- Portable Video Game Players
- Storage Drives
- PDAs
- HDD, SSD
