A6B595KLWTR-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 5.5Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | A6B595 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Voltage | 50V |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | Strobe, Serial |
| Output Configuration | Low Side |
| Output Current | 150mA |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Output Current per Channel | 150mA |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 50V Max |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 5.5 Ω |
| Built-in Protections | TRANSIENT |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
A6B595KLWTR-T Overview
Tape & Reel (TR) is how it's packaged.Package 20-SOIC (0.295, 7.50mm Width) contains it.It has been mounted as Surface Mount on the LED driver.A Latched Driver switch type is owned by it.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.The LED driver has a total of 8 outputs.In order to operate, it requires a voltage supply of 4.5V~5.5V.Voltage output is N-Channel volts at maximum.It comes under the family of A6B595.It has a total of 20 terminations.The operation is performed through the 20 pins.There are 1 functions of the LED driver.Maximum output current falls to 500mA when operation criteria are met.Using a voltage of 5V allows for high efficiency.In this case, it is mounted in the way of Surface Mount.The LED driving board is equipped with a total of 20 pins.Currently, the LED driving board has 5.5Ohm resistance.The output current is set to 150mA in this case.A maximum supply voltage of 5.5V is set in Vsup.For normal operation, the supply voltage (Vsup) should be kept above 4.5V.
A6B595KLWTR-T Features
Supplied from 5V
Resistance of 5.5Ohm
A6B595KLWTR-T Applications
There are a lot of Allegro MicroSystems A6B595KLWTR-T Power Switches ICs applications.
- Portable/Handheld Devices
- Hot Swaps
- HDD, SSD
- Storage Drives
- Portable Video Game Players
- Solid-State Drives
- PC Card Hot Swap
- PC Cards
- Set-top-box
- PDAs
