AAT4280IGU-1-T1
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2005 |
| Series | ASPM™ |
| Feature | Load Discharge, Slew Rate Controlled |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Resistance | 120MOhm |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Reach Compliance Code | unknown |
| Current Rating | 2.3A |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Max Output Current | 2.3A |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | SPST |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 1.5V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.004mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.81V~5.5V |
| Fault Protection | UVLO |
| Switch-on Time-Max | 40000ns |
| Rds On (Typ) | 80m Ω |
| Length | 2.85mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AAT4280IGU-1-T1 Overview
Cut Tape (CT) is how it's packaged.Package SOT-23-6 contains it.This lighting drivere has a mounting type of Surface Mount.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.There are 1 outputs available on this lighting driver.It uses a supply voltage of Not Required to operate.A maximum output voltage of P-Channel volts can be achieved by this LED driver.Currently, the LED driving board is equipped with Load Discharge, Slew Rate Controlled features.A total of 6 terminations can be found in it.In order to operate, the 6 pins are used.As far as the lighting driver is concerned, there are 1 functions.Maximum output current falls to 2.3A when operation criteria are met.High efficiency is possible at 5V supply voltage.Currently, the LED driving board has 120MOhm resistance.There is an electrical component included in the ASPM? series.A container with a capacity of Power Management Circuits contains this self-contained lighting driver.There is an analog input IC in this gadget, which is SPST.A total of 1 channels are available for you to choose from.The power supply of the part is 5V.In order to maximize efficiency, the supply voltage should be set to 5.5V.As far as input voltage goes, its maximum is 5.5V volts.The input voltage minimum is 1.5V volts.The maximum supply current for the LED driver is 0.004mA when it is operating.
AAT4280IGU-1-T1 Features
Supplied from 5V
Resistance of 120MOhm
1 channels
AAT4280IGU-1-T1 Applications
There are a lot of Skyworks Solutions Inc. AAT4280IGU-1-T1 Power Switches ICs applications.
- Notebook and Tablet Computers
- Portable Devices
- Telecom and Network Systems
- Gaming
- Solid-State Drives
- USB Ports/Hubs
- Notebook PC
- USB3.1 Power Delivery
- Wearable Devices
- Portable/Handheld Devices
