ACS724LLCTR-05AU-T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~150°C |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 120kHz |
| Output | Ratiometric, Voltage |
| Current - Supply (Max) | 14mA |
| Polarity | Unidirectional |
| Number of Channels | 1 |
| Polarization | Unidirectional |
| Max Supply Current | 14mA |
| Accuracy | ±0.6% |
| Response Time | 4μs |
| Sensor Type | Hall Effect, Open Loop |
| Linearity | ±1.5% |
| Sensitivity | 200mv/A |
| For Measuring | DC |
| Current - Sensing | 5A |
| Sensitivity (mV/A) | 200 mV/A |
| RoHS Status | ROHS3 Compliant |
ACS724LLCTR-05AU-T Overview
A 8-SOIC (0.154, 3.90mm Width) package is used for the protection of the current sensors. A protective Tape & Reel (TR) is placed over these current sensors in order to prevent damage to the devices. It is recommended that these current sensors provide no more than 14mA amps of current. A current sensor should provide a current no greater than 14mA. To ensure proper operation of these current sensors, the operating temperature cannot be below -40°C. For the current sensors, the maximum operating temperature should be set to 150°C.
ACS724LLCTR-05AU-T Features
Moisture Sensitivity Level: 2 (1 Year)
Operating Temperature: -40°C~150°C
1 Channels
Mounting Type: Surface Mount
Sensor Type: Hall Effect, Open Loop
Supply Voltage: 4.5V~5.5V
Frequency: 120kHz
Sensing Current: 5A
8-SOIC (0.154, 3.90mm Width) Package
ACS724LLCTR-05AU-T Applications
There are a lot of Allegro MicroSystems ACS724LLCTR-05AU-T Current Sensors applications.
- DC motor drives
- Power Supplies for welding applications
- Overcurrent Detection
- Industrial Monitoring and Control Systems
- Continuity
- Motor and load control
- Inverter and H-bridge current measurements
- Home Automation
- Electrical drives
- Overcurrent protection
