AD1835AASZ-REEL
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 52-QFP |
| Number of Pins | 52 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 52 |
| ECCN Code | EAR99 |
| Type | Stereo Audio |
| Subcategory | Other Consumer ICs |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD1835 |
| Pin Count | 52 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | I2S, SPI, Serial |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 110mA |
| Nominal Supply Current | 110mA |
| Number of Bits | 24 |
| Data Interface | Serial |
| Sampling Rate | 96 ksps |
| Voltage - Supply, Analog | 4.5V~5.5V |
| Voltage - Supply, Digital | 4.5V~5.5V |
| Number of A/D Converters | 2 |
| Signal to Noise Ratio (SNR) | 105 dB |
| Number of D/A Converters | 8 |
| Resolution (Bits) | 24 b |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 8 |
| Dynamic Range, ADCs / DACs (db) Typ | 105 / 108 |
| S/N Ratio, ADCs / DACs (db) Typ | 105 / 108 |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD1835AASZ-REEL Overview
As a space saver, it comes in the 52-QFP package. This package uses the Tape & Reel (TR) packaging method. In numerous applications, this electronic part can deliver high-efficiency performance as a type of Stereo Audio. This device employs the mounting type Surface Mount. A -40°C~85°C operating performance setting allows it to operate normally. It is equipped with a total of 2 / 8 ADCs and DACs. A supply voltage of 4.5V~5.5V is applied to the analog circuit. A supply voltage of 4.5V~5.5V is applied to the digital circuit. 52 terminations prevent signals from reflecting off transmission lines. The device has 52 pins. The board is configured with 52 pins. Its base part number AD1835 can be used to find other parts that are related. Based on the Surface Mount technology, the module is mounted to a PCB. Maintain a maximum voltage of 5.5V. To convert analog signals into digital signals, there are 2 A/D converters. This electronic part is classified into the subcategory of Other Consumer ICs. It is recommended that the supply voltage is maintained at 3V. The power supply is set to 5V. The device can operate with a voltage of 5V. Often in the process of converting digital signals into analog signals, there are 8 D/A converters. An information storage system with 24 bits is provided. Normally, a circuit will flow a current of 110mA over its entire length. Supply voltage is set to 110mA.
AD1835AASZ-REEL Features
Embedded in the 52-QFP package
Operating temperature of -40°C~85°C
2 / 8 ADCs / DACs
2 A/D converters
Operating supply current of 110mA
AD1835AASZ-REEL Applications
There are a lot of Analog Devices Inc. AD1835AASZ-REEL CODECs Interface ICs applications.
- Translating the decimal values to the binary
- Motor feedback
- Advanced breast cancer treatments
- Image compression
- Speed measurement
- Magnetic positional control
- Oil & gas production
- Ball screw positioning
- Robotic arm positioning
- Cut-to-length
