AD534KD
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | 14-CDIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Analog Computational Functions |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Supply Voltage | 15V |
| Base Part Number | AD534 |
| Function | Analog Multiplier/Divider |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 8V |
| Analog IC - Other Type | ANALOG MULTIPLIER OR DIVIDER |
| Operating Supply Current | 6mA |
| Output Current | 30mA |
| Accuracy | 0.25 % |
| Slew Rate | 20 V/μs |
| Max Input Voltage | 10V |
| Bandwidth | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Settling Time | 2 μs |
| Max Dual Supply Voltage | 18V |
| -3db Bandwidth | 1MHz |
| Max Frequency | 1MHz |
| Min Dual Supply Voltage | 8V |
| Dual Supply Voltage | 15V |
| Number of Amplifiers | 4 |
| Number of Bits/Stages | 4-Quadrant |
| Height | 2.41mm |
| Length | 17.78mm |
| Width | 7.37mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD534KD Overview
In order to package the product, Tube is used.It is embedded in the 14-CDIP (0.300, 7.62mm) package for cost-effectiveness.There is a tendency to use 4-Quadrant bits per stage.Powered by a voltage of 15V, it operates on a DC supply.There is a nominal negative supply voltage provided for -15V.Radio-frequency signals modulated in the range of 1MHz occupy this frequency range.This part number AD534 has a number of similarities to other electronic parts.It is a type of 14-pin electronic component famous for its high quality and superior performance in the industry.Electronic devices can be found under the Analog Computational Functions subcategory.It is mounted on the PCB using the method of Through Hole.Ideally, the maximum temperature at which the electronic device can operate should be set to 70°C.A temperature of 0°C should be maintained for the electronic device in order to enable it to operate.In addition, it is ideally suited for the operating supply voltage of 6mA.Dual supply voltages should be higher than 8V.The dual supply voltage should generally be lower than 18V.A digital IC of type ANALOG MULTIPLIER OR DIVIDER performs the same function as an analog IC.It is occupied by a modulated radio-frequency signal in the frequency range 1MHz.Due to its capability to handle a maximum input voltage of 10V, designers can make full use of its versatility.The unit operates on a dual supply voltage of 15V.The maximum supply voltage is limited at 18V.Normal operation requires a voltage of 8V as the minimum supply voltage.To avoid failures, the frequency should not exceed 1MHz.To provide high efficiency, 4 amplifiers are working in conjunction with one another.The output current 30mA can be controlled by a variable voltage.It is configured with 1 channels.
AD534KD Features
Supplied in the 14-CDIP (0.300, 7.62mm) package
Bandwidth of 1MHz
Operating supply current of 6mA
4 amplifiers
AD534KD Applications
There are a lot of Analog Devices Inc. AD534KD Analog Multipliers & Dividers applications.
- Signal operation
- Medical instruments
- Inverse/same-phase proportional circuit
- MP3
- Computer workstations and wireless base stations
- Instrumentation
- Portable docking station
- Signal filtering
- Switching amplifier
- Industrial applications including automation
