AD534KHZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Package / Case | TO-100-10 Metal Can |
| Number of Pins | 10 |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Analog Computational Functions |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Position | BOTTOM |
| Terminal Form | WIRE |
| Supply Voltage | 15V |
| Base Part Number | AD534 |
| Function | Analog Multiplier/Divider |
| Output Voltage | 11V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 8V |
| Analog IC - Other Type | ANALOG MULTIPLIER OR DIVIDER |
| Operating Supply Current | 6mA |
| Max Supply Current | 6mA |
| Accuracy | 0.25 % |
| Slew Rate | 20 V/μs |
| Max Input Voltage | 10V |
| Bandwidth | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Settling Time | 2 μs |
| Max Dual Supply Voltage | 18V |
| -3db Bandwidth | 1MHz |
| Max Frequency | 1MHz |
| Min Dual Supply Voltage | 8V |
| Dual Supply Voltage | 15V |
| Number of Amplifiers | 4 |
| Number of Bits/Stages | 4-Quadrant |
| Height | 4.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD534KHZ Overview
This product is packaged with Tube.Due to the cost-effectiveness of the package, it is included in TO-100-10 Metal Can.There is a considerable amount of use of 4-Quadrant bits per stage.For its operation, a voltage of 15V is applied.There is a nominal negative supply voltage provided for -15V.Radio-frequency signals modulated at 1MHz occupy the frequency range of 1MHz.A number of electronic parts with a similar part number can be found under AD534.Electronic components with 10-pins are known for their high quality and superior performance.This is an electronic device that belongs to the Analog Computational Functions subcategory.In order to mount it on the PCB, Through Hole is used.Electronic devices should be kept at 70°C degrees Celsius at all times.The minimum teperature that the electronic device operate with should be kept at 0°C.As a result, it is ideal for a supply voltage of 6mA.For a dual supply, this voltage should be higher than 8V.If the dual supply voltage is lower than 18V, then it is recommended.ANALOG MULTIPLIER OR DIVIDER operates as an analog integrated circuit.An modulated radio-frequency signal occupies the frequency range of 1MHz.Designed to support a maximum input voltage of 10V, it offers designers a wide range of flexibility in their designs.It operates with the dual supply voltage of 15V.The maximum supply voltage is limited at 18V.In order to maintain normal operation, the minimum supply voltage is set at 8V.As a precaution, the frequency should not exceed 1MHz.The 4 amplifiers provide high efficiency by working together.A voltage of 11V is released from the output end of the device.1 circuits are used to achieve the specific functions of the device.Maintaining the supply current below 6mA can lead to high reliability.
AD534KHZ Features
Supplied in the TO-100-10 Metal Can package
Bandwidth of 1MHz
Operating supply current of 6mA
4 amplifiers
AD534KHZ Applications
There are a lot of Analog Devices Inc. AD534KHZ Analog Multipliers & Dividers applications.
- Power transmission
- Scintillation detectors
- Cinema or auditorium audio system
- RF cable systems
- Blood pressure sensors
- Car stereo
- High input resistance broadband
- Digital cameras
- Power control
- Laptop
