AD534LDZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Package / Case | 14-CDIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Analog Computational Functions |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Supply Voltage | 15V |
| Base Part Number | AD534 |
| Function | Analog Multiplier/Divider |
| Output Voltage | 11V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 8V |
| Analog IC - Other Type | ANALOG MULTIPLIER OR DIVIDER |
| Operating Supply Current | 6mA |
| Accuracy | 0.25 % |
| Slew Rate | 20 V/μs |
| Max Input Voltage | 10V |
| Bandwidth | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Settling Time | 2 μs |
| Max Dual Supply Voltage | 18V |
| -3db Bandwidth | 1MHz |
| Max Frequency | 1MHz |
| Min Dual Supply Voltage | 8V |
| Dual Supply Voltage | 15V |
| Number of Amplifiers | 4 |
| Number of Bits/Stages | 4-Quadrant |
| Height | 3.56mm |
| Length | 19.43mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD534LDZ Overview
The packaging of the product is made up of Tube.Due to the cost-effectiveness of the package, it is included in 14-CDIP (0.300, 7.62mm).There is a common practice of using 4-Quadrant bits per stage.It operates with the supply voltage of 15V.A nominal negative supply voltage is provided for -15V.It is occupied by a modulated radio-frequency signal in the frequency range 1MHz.With its base part number AD534, electronic parts with a number of similarities can be found.It is a type of 14-pin electronic component that is renowned for its high quality and superior performance.It is an electronic device that falls under the subcategory of Analog Computational Functions.The way of Through Hole is used to mount it on the PCB.It is recommended that the device operate at a temperature of 70°C.Temperature of 0°C is the minimum temperature at which the electronic device should operate.The operating supply voltage of 6mA makes it ideal for this device.There should be a higher voltage on the dual supply than on 8V.A dual supply voltage should, in general, be lower than 18V.A digital IC of type ANALOG MULTIPLIER OR DIVIDER performs the same function as an analog IC.The frequency range of 1MHz is occupied by a modulated radio-frequency signal.Hence, designers are able to make full use of its flexibility because it supports the maximum input voltage of 10V.15V is the dual supply voltage for this device.At 18V, the maximum supply voltage is limited.For normal operation, a minimum supply voltage of 8V is maintained.In order to prevent failures, the frequency should not exceed 1MHz.By working together, the 4 amplifiers provide high efficiency.11V is the voltage that is released from the output end.The device is designed with 1 circuits in order to achieve its specific functions.
AD534LDZ Features
Supplied in the 14-CDIP (0.300, 7.62mm) package
Bandwidth of 1MHz
Operating supply current of 6mA
4 amplifiers
AD534LDZ Applications
There are a lot of Analog Devices Inc. AD534LDZ Analog Multipliers & Dividers applications.
- Switching amplifier
- Car stereo
- Multiplication and division circuits
- Laptop
- PDA
- Vehicle electronics
- Computer workstations and wireless base stations
- Signal amplification
- Inverse/same-phase proportional circuit
- RF cable systems
