AD537SD/883B
| Parameters | |
|---|---|
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | AD537 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 2.5mA |
| Nominal Supply Current | 2.5mA |
| Accuracy | 0.25 % |
| Frequency (Max) | 100kHz |
| Max Input Voltage | 11V |
| Reference Voltage | 1V |
| Max Dual Supply Voltage | 18V |
| Linearity | ±0.05% |
| Min Dual Supply Voltage | 5V |
| Screening Level | MIL-STD-883 |
| Operating Frequency-Max | 0.15MHz |
| Positive Input Voltage-Max | 32V |
| Full Scale | ±30ppm/°C |
| Height Seated (Max) | 5.08mm |
| Length | 19.43mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-CDIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Voltage to Frequency |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | IT CAN ALSO OPERATE FROM A +/-5V TO +/-18V SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Analog Special Function Converters |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
AD537SD/883B Overview
This package is embedded in the 14-CDIP (0.300, 7.62mm) package. Electronic parts such as this are mounted in the direction of Through Hole. Currently, there is a package in the way of Tube. Voltage to Frequency is the type of electrical device. The 14 termination is a technique in which a transmission line is terminated with a device whose characteristic impedance matches that of the transmission line. 14 pins are equipped with this device. A supply voltage of 15V supplies power to the device. It is possible to identify related parts based on the base part number. When a computer or other communication device is attached to a signal interface, there are 14 pins, which are pronged contacts. For the purpose of ensuring the reliability of the device, it operates at a minimum operating temperature of -55°C. In order to ensure its reliability, it operates at an operating temperature of 125°C. Mounted in the way of Through Hole. This part is included in Analog Special Function Converters. When the supply voltage (Vsup) exceeds 4.5V, it should be used. When 36V is reached, the maximum supply voltage (Vsup) is reached. It operates at a maximum frequency of 100kHz. In order for 2.5mA to perform its functions to the fullest extent, it requires a supply current. A lot of electronic parts are available with an input type of 11V. The maximum operating frequency of this device is 0.15MHz. The reference voltage of this electrical device is 1V. It is also characterized by IT CAN ALSO OPERATE FROM A +/-5V TO +/-18V SUPPLY.
AD537SD/883B Features
14-CDIP (0.300, 7.62mm) package
14 terminations
14 pin count
14 pins
The maximal operating frequency of 0.15MHz
AD537SD/883B Applications
There are a lot of Analog Devices Inc. AD537SD/883B V/F & F/V Converters applications.
- lsolation of High Common-Mode Voltages
- Automotive Sensing
- Breaker Point Dwell Meters
- Clutch Control
- Analog Data Transmission and Recording
- Touch or Sound Switches
- Speed Governors
- Over-and Under-Speed Sensing
- Integrating a/d converter
- Low-Cost Analog-to-Digital Conversion
