AD537SH/883B
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-100-10 Metal Can |
| Number of Pins | 10 |
| Packaging | Bulk |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Voltage to Frequency |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | IT CAN ALSO OPERATE FROM A +/-5V TO +/-18V SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Analog Special Function Converters |
| Terminal Position | BOTTOM |
| Terminal Form | WIRE |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | AD537 |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 2.5mA |
| Nominal Supply Current | 2.5mA |
| Accuracy | 0.25 % |
| Frequency (Max) | 100kHz |
| Max Input Voltage | 11V |
| Reference Voltage | 1V |
| Max Dual Supply Voltage | 18V |
| Linearity | ±0.05% |
| Min Dual Supply Voltage | 5V |
| Screening Level | MIL-STD-883 |
| Operating Frequency-Max | 0.15MHz |
| Negative Supply Voltage-Nom | -15V |
| Positive Input Voltage-Max | 32V |
| Full Scale | ±30ppm/°C |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD537SH/883B Overview
Located within the TO-100-10 Metal Can package, it can be found here. In this case, the electronic part is mounted in the direction of Through Hole. Bulk packages it in this way. Currently, an electrical device of type Voltage to Frequency is being used. There are 10 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is equipped with 10 pin count. An electrical supply of voltage 15V supplies power to the device. Parts that are related to the base part number can be identified. On computers and other communication devices, there are pins called 10 pins, which are pronged contacts. It operates with the minimal operating temperature of -55°C to ensure its reliability. In order to ensure the reliability of the device, it operates at the maximum operating temperature of 125°C. It has been mounted in the way of Through Hole. Analog Special Function Converters includes this part. In order to ensure proper operation, the supply voltage (Vsup) should be greater than 4.5V. 36V is the maximum supply voltage (Vsup). 100kHz is the maximum frequency at which it operates. It is necessary to provide current to 2.5mA in order for it to function fully. A maximum input type of 11V is available for this electronic part. A maximum operating frequency of 0.15MHz is used. In this electrical device, the reference voltage is 1V. As well as IT CAN ALSO OPERATE FROM A +/-5V TO +/-18V SUPPLY, it has the following characteristics.
AD537SH/883B Features
TO-100-10 Metal Can package
10 terminations
10 pin count
10 pins
The maximal operating frequency of 0.15MHz
AD537SH/883B Applications
There are a lot of Analog Devices Inc. AD537SH/883B V/F & F/V Converters applications.
- Clutch Control
- Tachometers
- Voltage to Frequency Conversions
- Frequency Meters/Tachometer
- Breaker Point Dwell Meters
- lsolation of High Common-Mode Voltages
- Integrating a/d converter
- Frequency to Voltage Conversions
- FM Demodulation
- Fm analog signal mod/d emod
