AD620BRZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 10GOhm |
| Max Power Dissipation | 650mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD620 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 1.3mA |
| Nominal Supply Current | 900μA |
| Power Dissipation | 650mW |
| Max Supply Current | 1.3mA |
| Slew Rate | 1.2V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 93 dB |
| Current - Input Bias | 500pA |
| Voltage - Supply, Single/Dual (±) | 4.6V~36V ±2.3V~18V |
| Output Current per Channel | 18mA |
| Input Offset Voltage (Vos) | 15μV |
| Bandwidth | 1MHz |
| Gain Bandwidth Product | 120 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Power Supply Rejection Ratio (PSRR) | 140dB |
| Settling Time | 15 μs |
| -3db Bandwidth | 1MHz |
| Dual Supply Voltage | 15V |
| Input Offset Current-Max (IIO) | 0.00075μA |
| Voltage Gain-Min | 1 |
| Voltage Gain-Nom | 10 |
| Non-linearity-Max | 0.004% |
| Height | 1.75mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD620BRZ Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. An op amp ic of the Instrumentation type. A Tube case is used to deliver the buffer op amp. It is estimated that there will be 8 terminations in the next few months. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. There are 8 pins on this chip. Op amp rates 15μV as input offset voltage. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . You can run this op amp ic on 1.3mA . There are a total of 1 channels available on the op amps. This operational amplifier can conduct a voltage gain of up to 1 at a minimum. Linear amplifier resistance should stay within the range of 10GOhm.
AD620BRZ Features
8 Pins
supply voltage of 15V
Resistance of 10GOhm
AD620BRZ Applications
There are a lot of Analog Devices Inc. AD620BRZ Instrumentational OP Amps applications.
- Division circuits
- Fast A/D and D/A converters
- Information processing
- Integrator circuits
- Signal transformation
- High speed sample
- Digital cameras
- Portable docking station
- Gaming industry
- Laptop
