AD632SD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | 14-CDIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN LEAD |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | Analog Computational Functions |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 15V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | AD632 |
| Function | Analog Multiplier/Divider |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 22V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Analog IC - Other Type | ANALOG MULTIPLIER OR DIVIDER |
| Operating Supply Current | 6mA |
| Number of Bits | 4 |
| Accuracy | 0.5 % |
| Slew Rate | 20 V/μs |
| Max Input Voltage | 12V |
| Bandwidth | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Settling Time | 2 μs |
| Max Dual Supply Voltage | 22V |
| -3db Bandwidth | 1MHz |
| Min Dual Supply Voltage | 8V |
| Dual Supply Voltage | 15V |
| Number of Bits/Stages | 4-Quadrant |
| Height Seated (Max) | 2.95mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD632SD Overview
The packaging of the product is made up of Tube.In order to maximize cost effectiveness, it is incorporated into the 14-CDIP (0.300, 7.62mm) package.In most cases, there are 4-Quadrant bits per stage.In order to operate it, a voltage of 15V is applied.There is a nominal negative supply voltage of -15V.Radio-frequency signals modulated at 1MHz occupy the frequency range of 1MHz.A 14 termination is used to prevent signals from reflecting off the end of the transmission line.The base part number AD632 indicates that there will be a number of electronic parts that share many similarities.A 14-pin electronic component is well known for its superior quality and performance in the industry.In the subcategory Analog Computational Functions, it belongs to the category of electronic devices.In order to mount it on the PCB, Through Hole is used.Electronic devices should be operated at a maximum temperature of 125°C.The minimum teperature that the electronic device operate with should be kept at -55°C.As a result of the component with the lowest tolerance for high temperatures, the reflow temperature limit of NOT SPECIFIED has been established.The operating voltage of 6mA is ideal for this device.Dual supply voltages should be higher than 8V.The dual supply voltage should be lower than 22V.ANALOG MULTIPLIER OR DIVIDER works as its analog IC type.There is a modulated radio-frequency signal in the range of 1MHz.Designed to support a maximum input voltage of 12V, it offers designers a wide range of flexibility in their designs.With a dual supply voltage of 15V, it operates.The number of bits of information that can be stored is 4.Depending on the supply voltage 22V, it is capable of operating.It incorporates elements of 1.
AD632SD Features
Supplied in the 14-CDIP (0.300, 7.62mm) package
Bandwidth of 1MHz
Operating supply current of 6mA
Operating supply voltage of 22V
AD632SD Applications
There are a lot of Analog Devices Inc. AD632SD Analog Multipliers & Dividers applications.
- Test equipment
- Fast A/D and D/A converters, video amplifiers
- Video data acquisition
- Measurements of Wheatstone bridge
- Inverse/same-phase proportional circuit
- Professional videography
- Voltage regulation circuit
- Oscilloscopes
- Power generator
- Industrial applications including automation
