AD633ANZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mount | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 930.006106mg |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Analog Computational Functions |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Supply Voltage | 15V |
| Base Part Number | AD633 |
| Function | Analog Multiplier |
| Operating Supply Voltage | 15V |
| Number of Elements | 1 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 8V |
| Operating Supply Current | 6mA |
| Number of Bits | 4 |
| Accuracy | 2 % |
| Slew Rate | 20 V/μs |
| Max Input Voltage | 10V |
| Bandwidth | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Settling Time | 2 μs |
| Max Dual Supply Voltage | 18V |
| -3db Bandwidth | 1MHz |
| Max Frequency | 1MHz |
| Min Dual Supply Voltage | 8V |
| Dual Supply Voltage | 15V |
| Number of Amplifiers | 3 |
| Number of Bits/Stages | 4-Quadrant |
| Height | 3.43mm |
| Length | 9.27mm |
| Width | 7.24mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD633ANZ Overview
The packaging of the product is made up of Tube.This module is embedded within the 8-DIP (0.300, 7.62mm) package in order to provide cost-effectiveness.There is a considerable amount of use of 4-Quadrant bits per stage.In order to operate it, a voltage of 15V is applied.This device is supplied with a nominally negative voltage of -15V.There is a modulated radio-frequency signal in the range of 1MHz.Its base part number AD633 is associated with electronic parts that share a number of similarities.It is a type of 8-pin electronic component noted for its superior performance and high quality.It is an electronic device that can be found under the subcategory of Analog Computational Functions.A PCB is mounted by the way of Through Hole.Ideally, the maximum temperature at which the electronic device can operate should be set to 85°C.Temperatures below -40°C should be maintained to ensure proper operation of electronic devices.The operating supply voltage of 6mA makes it ideal for this device.A voltage higher than 8V should be used for the dual supply.A dual supply voltage should, in general, be lower than 18V.Modulated radio-frequency signals occupy the frequency range of 1MHz.The input voltage can be increased up to 10V, thus allowing designers to make full use of its flexibility.The unit operates on a dual supply voltage of 15V.4 bits information can be stored.The device is capable of operating from a supply voltage of 15V.It is incorporated with 1 elements.At 18V, the maximum supply voltage is limited.For normal operation, the minimum supply voltage is maintained at 8V.For failure prevention, the frequency should not exceed 1MHz.The high efficiency of the system is achieved through the combination of 3 amplifiers.
AD633ANZ Features
Supplied in the 8-DIP (0.300, 7.62mm) package
Bandwidth of 1MHz
Operating supply current of 6mA
Operating supply voltage of 15V
3 amplifiers
AD633ANZ Applications
There are a lot of Analog Devices Inc. AD633ANZ Analog Multipliers & Dividers applications.
- Power control
- Portable media players
- Fast A/D and D/A converters, video amplifiers
- Information processing
- High-frequency data acquisition systems
- Comparator
- Inverse/same-phase proportional circuit
- Signal operation
- Home and commercial audio systems
- Automotive sensors
