AD652JP
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Number of Pins | 20 |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Voltage to Frequency |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Analog Special Function Converters |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Frequency | 5MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD652 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 12V |
| Operating Supply Current | 15mA |
| Nominal Supply Current | 15mA |
| Accuracy | 2 % |
| Frequency (Max) | 2MHz |
| Max Input Voltage | 10V |
| Reference Voltage | 5V |
| Max Dual Supply Voltage | 18V |
| Linearity | ±0.02% |
| Min Dual Supply Voltage | 6V |
| Dual Supply Voltage | 15V |
| Negative Supply Voltage-Nom | -15V |
| Positive Input Voltage-Max | 5V |
| Full Scale | ±25ppm/°C |
| Total Error-Max | 0.5% |
| Height Seated (Max) | 4.57mm |
| Length | 8.9662mm |
| Width | 8.9662mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD652JP Overview
As part of the 20-LCC (J-Lead) package, it is embedded. A component of this electronic system has been mounted in the direction of Surface Mount. There is a package in the way of Tube. The type of this electrical device is Voltage to Frequency. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The device is equipped with a pin count of 20. An electrical supply of voltage 15V supplies power to the device. According to the base part number, its related parts can be founded. On computers and other communication devices, there are pins called 20 pins, which are pronged contacts. To ensure its reliability, it must operate at a minimum operating temperature of 0°C. It operates with the maximal operating temperature of 70°C to ensure its reliability. Surface Mount mounted in the way. Analog Special Function Converters contains this part. If the supply voltage (Vsup) is greater than 12V, then it should be used. The maximal supply voltage (Vsup) reaches 36V. It operates at a frequency of 5MHz. With a maximum frequency of 2MHz, it operates. It is necessary to supply 15mA with a current so that it can fully perform its function. A maximum input type of 10V is available for this electronic part. A dual supply voltage of 15V is used to power it. A reference voltage of 5V is used in this electrical device.
AD652JP Features
20-LCC (J-Lead) package
20 terminations
20 pin count
20 pins
A dual supply voltage of 15V
AD652JP Applications
There are a lot of Analog Devices Inc. AD652JP V/F & F/V Converters applications.
- Frequency to Voltage Conversions
- Fm analog signal mod/d emod
- Over-and Under-Speed Sensing
- Clutch Control
- Cruise Control
- Speedometers
- Tachometer
- FM Demodulation
- Motor speed control
- Remote-Sensor Monitoring
