AD652SQ
| Parameters | |
|---|---|
| Reference Voltage | 5V |
| Max Dual Supply Voltage | 18V |
| Linearity | ±0.02% |
| Min Dual Supply Voltage | 6V |
| Dual Supply Voltage | 15V |
| Negative Supply Voltage-Nom | -15V |
| Source Url Status Check Date | 2013-05-01 14:56:15.745 |
| Positive Input Voltage-Max | 5V |
| Full Scale | ±25ppm/°C |
| Total Error-Max | 0.5% |
| Height Seated (Max) | 5.08mm |
| Length | 19.05mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-CDIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Voltage to Frequency |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Analog Special Function Converters |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Frequency | 5MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | AD652 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 12V |
| Operating Supply Current | 15mA |
| Nominal Supply Current | 15mA |
| Accuracy | 2 % |
| Frequency (Max) | 2MHz |
| Max Input Voltage | 10V |
AD652SQ Overview
Located within the 16-CDIP (0.300, 7.62mm) package, it can be found here. The electronic component is mounted in the direction of Through Hole. The package is designed in the way of Tube. An electrical device of the type Voltage to Frequency is being used. It is possible to terminate a transmission line with a 16 termination, which is an end device that matches the line's characteristic impedance. It is equipped with 16 pin count. The device is powered by a supply voltage of 15V. According to the base part number, its related parts can be founded. 16 pins are pronged contacts found in computer or other communication devices, as part of a signal interface. Consequently, it operates at a minimum operating temperature of -55°C to ensure its reliability. As a measure to ensure its reliability, it operates at a maximum operating temperature of 125°C. It has been mounted in the way of Through Hole. This part is included in Analog Special Function Converters. The supply voltage (Vsup) should be greater than 12V if it is suitable for use. The maximal supply voltage (Vsup) reaches 36V. The frequency 5MHz indicates how often it operates. With a maximum frequency of 2MHz, it operates. It is necessary to supply 15mA with a current so that it can fully perform its function. 10V is the maximum input type for this electronic component. The device is powered by a dual supply voltage of 15V. In this electrical device, 5V is the reference voltage.
AD652SQ Features
16-CDIP (0.300, 7.62mm) package
16 terminations
16 pin count
16 pins
A dual supply voltage of 15V
AD652SQ Applications
There are a lot of Analog Devices Inc. AD652SQ V/F & F/V Converters applications.
- Integrating a/d converter
- Speed Governors
- Clutch Control
- Frequency to Voltage Conversions
- Speedometers
- FM Demodulation
- Tachometer
- Hand-Held Tachometers
- Frequency-to-Voltage Conversion (Tachometer)
- Remote-Sensor Monitoring
