AD705-00E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Supplier Device Package | 8-MSOP |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | AD |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Technology | Hall Effect |
| Voltage - Supply | 4.5V~30V |
| Function | Omnipolar Switch |
| Current - Supply (Max) | 4.5mA |
| Output Type | Open Collector |
| Max Output Current | 20mA |
| Polarization | North Pole, South Pole |
| Current - Output (Max) | 20mA |
| Max Supply Current | 4.5mA |
| Sensing Method | Hall Effect |
| Test Condition | -40°C ~ 125°C |
| Sensing Range | ±5mT Trip, ±2.5mT Release |
| RoHS Status | ROHS3 Compliant |
AD705-00E Overview
The magnetic switch is packaged in the Tube to prevent damage. As a safety precaution, the magnetic switches are packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) packages. Good performance is achieved by magnetic switches that can supply 4.5mA as maximum current. If these switches work, they can output 20mA as the maximum current. Magnet switches should have a maximum current of 20mA in order to function correctly. Switches of this type can deliver currents up to 4.5mA. For the magnetic switches, a maximum operating temperature of 125°C may be set. For this magnetic switch to function, however, the operating temperature cannot be below -40°C.
AD705-00E Features
Packaging: Tube
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Supply Voltage: 4.5V~30V
Operating Temperature: -40°C~125°C TA
Mounting Type: Surface Mount
Output Type: Open Collector
Maximum Supply Current: 4.5mA
AD705-00E Applications
There are a lot of NVE Corp/Sensor Products AD705-00E Magnetic Switches applications.
- Synchronization
- Factory automation
- Shafts in transmissions, hydraulic motors, pumps and gear boxes
- Magnetic encoders
- Medication dispensing control
- Transmission
- Position and limit sensing
- Monitor protections of the safety gates
- Speed and RPM (revolutions per minute) sensing
- Reed switch replacement
