AD734AQ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | 14-CDIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Analog Computational Functions |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Supply Voltage | 15V |
| Base Part Number | AD734 |
| Function | Analog Multiplier |
| Output Voltage | 12V |
| Number of Elements | 1 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 8V |
| Operating Supply Current | 12mA |
| Nominal Supply Current | 9mA |
| Output Current | 10mA |
| Slew Rate | 450 V/μs |
| Bandwidth | 40MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Settling Time | 200 ns |
| Max Dual Supply Voltage | 16.5V |
| Max Frequency | 10MHz |
| Min Dual Supply Voltage | 8V |
| Dual Supply Voltage | 15V |
| Number of Amplifiers | 4 |
| Number of Bits/Stages | 4-Quadrant |
| Height | 3.56mm |
| Length | 19.94mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD734AQ Overview
Its packaging is made up of Tube.This module is embedded within the 14-CDIP (0.300, 7.62mm) package in order to provide cost-effectiveness.In most cases, there are 4-Quadrant bits per stage.The voltage supply for this device is 15V.It is provided with a nominal negative supply voltage of -15V.Radio-frequency signals modulated in the frequency range of 40MHz occupy the range of 40MHz.The base part number AD734 indicates that there will be a number of electronic parts that share many similarities.It is a type of 14-pin electronic component that is known for its high quality and superior performance.Electronics that fall under the subcategory Analog Computational Functions are included in this device.On the PCB, it is mounted using Through Hole.Electronic devices should be kept at 85°C degrees Celsius at all times.A minimum temperature of -40°C should be maintained for the operation of the electronic device.It is ideally suited to the operating supply voltage of 12mA.8V should be higher than the dual supply voltage.The dual supply voltage should generally be lower than 16.5V.The unit operates on a dual supply voltage of 15V.It incorporates elements of 1.A maximum supply voltage is limited at 16.5V.The minimum supply voltage is kept at 8V for normal operation.In order to prevent failures, the frequency should not exceed 10MHz.The high efficiency can be achieved by combining 4 amplifiers.12V is the voltage that is released from the output end.A variable voltage can be used to control the output current 10mA.
AD734AQ Features
Supplied in the 14-CDIP (0.300, 7.62mm) package
Bandwidth of 40MHz
Operating supply current of 12mA
4 amplifiers
AD734AQ Applications
There are a lot of Analog Devices Inc. AD734AQ Analog Multipliers & Dividers applications.
- Broadcasting
- Precision measurement
- Automatic control
- Ultrasound transducers
- Video data acquisition
- Polarized and non-polarized electrodes
- Digital cameras
- MP3
- Navigation
- Fast A/D and D/A converters, video amplifiers
