AD743JRZ-16
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD743 |
| Pin Count | 16 |
| Number of Channels | 1 |
| Operating Supply Current | 10mA |
| Quiescent Current | 10mA |
| Slew Rate | 2.8V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 250pA |
| Voltage - Supply, Single/Dual (±) | 9.6V~36V ±4.8V~18V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 4.5MHz |
| Gain Bandwidth Product | 4.5MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 4500 kHz |
| Voltage Gain | 132.04dB |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 96dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 250μV |
| Settling Time | 6 μs |
| Low-Bias | YES |
| Bias Current-Max (IIB) @25C | 0.0004μA |
| Dual Supply Voltage | 15V |
| Input Capacitance | 18pF |
| Input Offset Current-Max (IIO) | 0.0064μA |
| Input Voltage Noise Density | 5.5nV/sqrt Hz |
| Height | 2.35mm |
| Length | 10.5mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD743JRZ-16 Overview
It is packaged in an 16-SOIC (0.295, 7.50mm Width)-case that protects the operational amplifiers from damage. Buffer amps of this type are called J-FET-types. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. The number of terminations approaches 16. The total number of pins on linear amplifier is 16. This linear amplifier should be powered by an 15V battery. It should be noted that this op amp is a type of Operational Amplifier device. The buffer op amp includes 16 pins. With regard to input offset voltage, instrumentation amplifier is rated at 1mV. Surface Mount is the recommended mounting type for this linear amplifier. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of 0°C~70°C . Using an 10mA supply current, this operational amplifier ics can be operated. Op amp is a member of the 132.04dB's 132.04dB family. There are 1 channels on the operational amplifiers. As a result, linear amplifier's quiescent current is 10mA.
AD743JRZ-16 Features
16 Pins
supply voltage of 15V
132.04dB voltage gain
AD743JRZ-16 Applications
There are a lot of Analog Devices Inc. AD743JRZ-16 Instrumentational OP Amps applications.
- Wireless base stations
- Micro signal measurement
- Communication device
- High gain DC amplifier
- Communication
- Band-stop filter
- Voltage regulation circuit
- Portable docking station
- pH (acidity)
- Switching amplifier
