AD7654ACPZ
| Parameters | |
|---|---|
| Output Format | SERIAL, PARALLEL, WORD |
| Signal to Noise Ratio (SNR) | 90 dB |
| Conversion Time-Max | 0.875μs |
| Number of Analog Inputs | 4 |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad, CSP |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Series | PulSAR® |
| JESD-609 Code | e3 |
| Feature | Simultaneous Sampling |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 135mW |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD7654 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Unipolar |
| Configuration | MUX-S/H-MUX-ADC |
| Interface | SPI |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Power Dissipation | 135mW |
| Number of Bits | 16 |
| Input Type | Pseudo-Differential, Single Ended |
| Min Input Voltage | 2.3V |
| Architecture | SAR |
| Number of Inputs | 2, 4 |
| Max Input Voltage | 2.5V |
| Converter Type | ADC, SUCCESSIVE APPROXIMATION |
| Supply Type | Analog, Digital |
| Reference Type | External |
| Data Interface | SPI, Parallel, DSP |
| Resolution | 2 B |
| Sampling Rate | 500 ksps |
| Voltage - Supply, Analog | 5V |
| Number of Analog In Channels | 4 |
| Sampling Rate (Per Second) | 500k |
| Output Bit Code | BINARY |
| Power Consumption | 120mW |
| Linearity Error-Max (EL) | 0.0053% |
| Integral Nonlinearity (INL) | 3.5 LSB |
| Sample and Hold / Track and Hold | SAMPLE |
| Ratio - S/H:ADC | 2:1 |
AD7654ACPZ Overview
The analogue to digital converter is designed with 16 Bits.The AD converter is embedded in the 48-VFQFN Exposed Pad, CSP package.The ADC converter is packaged in the way of Tray.The ADC converter is equipped with 1 Functions .There are 48 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 4 channels.The is equipped with 48 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 500k Hz.The input type of this electronic AD converter is Pseudo-Differential, Single Ended.There are External reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-S/H-MUX-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is SAR.There are 48 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 2 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to AD7654 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Analog, Digital can be used to categorize supply types.There is a possibility of mounting the analogue to digital converter by using the Surface Mount axis.The ADC converter operates with the maximal supply voltage of 5.25V.2, 4 inputs are employed.It operates with the minimal supply voltage of 4.75V.The output formats of this electrical AD converter are SERIAL, PARALLEL, WORD , which are used to determine which data is exported and how data is displayed in many areas of OLIB.This electrical digital converter operates from a supply voltage of 5V.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 135mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 135mW.Simultaneous Sampling can be ensured when operating.The ADC converter consists of 1 elements.The maximal input type of this electronic AD converter is 2.5V.There are 4 analog transmissions, which are both based on how they adapt data to combine an input signal with a carrier signal. The digital converter supports the minimal input voltage of 2.3V.It is a type of FPGA belonging to the PulSAR? series.
AD7654ACPZ Features
1 Functions
48 basic kinds of terminations
48 pin count
Minimal supply voltage of 4.75V
1 elements
PulSAR? series
AD7654ACPZ Applications
There are a lot of Analog Devices Inc. AD7654ACPZ ADC applications.
- CMOS Image sensors for mobile applications
- Data Acquisition Systems
- Spectrum Analysis
- Telecommunications
- Instrumentation and test equipment
- Medical Imaging
- Imaging Systems
- Displaying
- TD-SCDMA, WiMAX
- Communication Systems
