AD7710ANZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | PGA |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 52.5mW |
| Technology | CMOS |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | AD7710 |
| Pin Count | 24 |
| Operating Supply Voltage | 10V |
| Number of Elements | 1 |
| Polarity | Bipolar, Unipolar |
| Configuration | MUX-PGA-ADC |
| Number of Channels | 2 |
| Interface | SPI, Serial |
| Max Supply Voltage | 10.5V |
| Min Supply Voltage | 4.75V |
| Nominal Supply Current | 4.5mA |
| Power Dissipation | 53mW |
| Number of Bits | 24 |
| Input Type | Differential |
| Min Input Voltage | 2.5V |
| Architecture | Sigma-Delta |
| Max Input Voltage | 5V |
| Converter Type | ADC, DELTA-SIGMA |
| Supply Type | Dual, Single |
| Reference Voltage | 2.5V |
| Reference Type | External, Internal |
| Data Interface | SPI |
| Resolution | 3 B |
| Sampling Rate | 1.028 ksps |
| Voltage - Supply, Analog | 5V~10V |
| Number of Analog In Channels | 2 |
| Sampling Rate (Per Second) | 1k |
| Output Bit Code | BINARY, OFFSET BINARY |
| Power Consumption | 30mW |
| Linearity Error-Max (EL) | 0.003% |
| Min Dual Supply Voltage | 4.75V |
| Sample and Hold / Track and Hold | SAMPLE |
| Number of A/D Converters | 1 |
| Dual Supply Voltage | 5V |
| Input Capacitance | 20pF |
| Signal to Noise Ratio (SNR) | 131 dB |
| Negative Supply Voltage-Nom | -5V |
| Height | 3.3mm |
| Length | 31.75mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD7710ANZ Overview
The analogue to digital converter is designed with 24 Bits.The AD converter is embedded in the 24-DIP (0.300, 7.62mm) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 24 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 2 channels.The is equipped with 24 pin count.There are ADC, DELTA-SIGMA converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Through Hole.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 1k Hz.The input type of this electronic AD converter is Differential.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-PGA-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is Sigma-Delta.The supply/analog voltage of this electrical ADC converter is 5V~10V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 3 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to AD7710 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Dual, Single describes the type of supply.Through Hole can be used to mount the AD converter on the wall.The ADC converter operates with the maximal supply voltage of 10.5V.It operates with the minimal supply voltage of 4.75V.This electrical digital converter operates from a supply voltage of 10V.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 53mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 52.5mW.The number of channels is growing strong/weak: 2.There are 1 A/D converters, which are used to convert an analog signal like voltage to digital form so that it can be read and processed by a microcontroller. PGA can be ensured when operating.The ADC converter consists of 1 elements.The maximal input type of this electronic AD converter is 5V.The digital converter supports the minimal input voltage of 2.5V.The dual supply type of this electronic AD converter is 5V.It operates with the minimal dual supply voltage of 4.75V.The reference voltage amounts to 2.5V.
AD7710ANZ Features
1 Functions
24 basic kinds of terminations
24 pin count
Minimal supply voltage of 4.75V
1 elements
AD7710ANZ Applications
There are a lot of Analog Devices Inc. AD7710ANZ ADC applications.
- Broadband data applications
- Digital Multimeters, PLC's (Programming Logic Controllers)
- GSM, EDGE, PHS, UMTS, WCDMA, CDMA2000,
- Multiplexed Data Acquisition Systems
- Micro and pico cell systems, software radios
- Cell Phones
- Medical Instrumentation and medical imaging
- Uninterrupted Power Supplies
- Digital signal processing
- Multicarrier, multimode digital receivers
