banner_page

AD790JR

Surface Mount Tube 45 ns μs Linear Comparators 5μA pA 10mA μA 600μV mV


  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-AD790JR
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 414
  • Description: Surface Mount Tube 45 ns μs Linear Comparators 5μA pA 10mA μA 600μV mV (Kg)

Details

Tags

Parameters
Contact Plating Lead, Tin
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Operating Temperature 0°C~70°C
Packaging Tube
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type with Latch
Subcategory Comparator
Max Power Dissipation 500mW
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 240
Number of Functions 1
Supply Voltage 15V
Time@Peak Reflow Temperature-Max (s) 20
Base Part Number AD790
Pin Count 8
Output Type CMOS, TTL
Operating Supply Voltage 5V
Number of Elements 1
Number of Circuits 1
Nominal Supply Current 10mA
Power Dissipation 250mW
Max Supply Current 12mA
Propagation Delay 50 ns
Quiescent Current 10mA
Turn On Delay Time 45 ns
Response Time 45 ns
Common Mode Rejection Ratio 95 dB
Voltage - Supply, Single/Dual (±) 4.5V~7V ±2.25V~16.5V
Input Offset Voltage (Vos) 600μV
Neg Supply Voltage-Nom (Vsup) -15V
Power Supply Rejection Ratio (PSRR) 90dB
Dual Supply Voltage 3V
Input Bias Current 5μA
Voltage - Input Offset (Max) 1.5mV @ 5V
Current - Input Bias (Max) 5μA @ 5V
Hysteresis 500μV
CMRR, PSRR (Typ) 95dB CMRR, 90dB PSRR
Height 0m
Length 0m
Width 0m
Radiation Hardening No
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

AD790JR Overview


In order to facilitate transportation, it is packaged in 8-SOIC (0.154, 3.90mm Width) .A comparator with a CMOS, TTL output is used here.This device is designed in Tube case.There are8 terminals on the comparator.The electrical component in this case belongs to the Comparator families.When supplied with 15V voltage, the comparator is capable of performing a wide range of tasks.When it comes to types, this comparator is a typical with Latch .Electronic comparator consists of 1 elements in total.As a result, it contains 8 pins.Surface Mount universial mout for easy adapting.In order to avoid malfunctions, the operating temperature should be set to 0°C~70°C .The comparator is equipped with 8 pins.In order to find a solution that meets your specific needs, search AD790 for more pin-to-pin solutions.There is 10mA current flowing in this comparator.Normal operation of the device requires a nominal supply current of 10mA .An excess of current supply over 12mA could result in malfunction of the comparator.Comparator electronics is necessary to have an operating supply voltage of 5V for normal operation.

AD790JR Features


CMOS, TTL output capability
with Latch IC
Employing 1 elements
Operates under 0°C~70°C
Quiescent Current: 10mA

AD790JR Applications


There are a lot of Analog Devices Inc. AD790JR linear comparators applications.

  • Multivibrators and High-Voltage Digital Logic Gates
  • Automotive
  • Limit Comparators
  • Wide Range VCO; MOS Clock Timers
  • Factory automation & control
  • High-Speed Differential Line Receiver
  • Appliances
  • General Purpose Low Voltage Applications
  • Set Top Boxes
  • Wearable Devices

Write a review

Note: HTML is not translated!
    Bad           Good