AD8000YCPZ-R2
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8000 |
| Pin Count | 8 |
| Operating Supply Voltage | 9V |
| Number of Channels | 1 |
| Operating Supply Current | 13.5mA |
| Nominal Supply Current | 14.3mA |
| Quiescent Current | 14.3mA |
| Slew Rate | 4100V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 54 dB |
| Current - Input Bias | 5μA |
| Voltage - Supply, Single/Dual (±) | 4.5V~12V ±2.25V~6V |
| Output Current per Channel | 100mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 1.5 GHz |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| -3db Bandwidth | 1.35GHz |
| Dual Supply Voltage | 5V |
| Input Capacitance | 3.6pF |
| Height | 840μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8000YCPZ-R2 Overview
In the package, you will find a 8-WFDFN Exposed Pad, CSP-case to contain the op amp ic. Buffer amps of this type are called Current Feedback-types. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. During the past two weeks, there have been close to 8 terminations. Linear amplifier has a total of 8 pins. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 8 pins are available on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 1mV. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . As long as the supply current of the chip does not exceed 13.5mA, this op amp ic can operate. On the buffer amps, there are 1 channels that can be used. The operating supply voltage of instrumentation amplifier is rated 9V voltage. As a result, linear amplifier's quiescent current is 14.3mA.
AD8000YCPZ-R2 Features
8 Pins
AD8000YCPZ-R2 Applications
There are a lot of Analog Devices Inc. AD8000YCPZ-R2 Instrumentational OP Amps applications.
- Video amplifiers
- High input resistance broadband
- High/low-pass filter circuit
- Computer workstations
- MP3
- Automatic control
- ECG equipment
- Biopotential
- single/dual op amp sum and difference circuits
- Medical imaging
