AD8066ARM
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | FastFET™ |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8066 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Operating Supply Current | 14.8mA |
| Nominal Supply Current | 14.8mA |
| Output Current | 35mA |
| Quiescent Current | 7.4mA |
| Slew Rate | 180V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 3pA |
| Voltage - Supply, Single/Dual (±) | 5V~24V ±2.5V~12V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Gain Bandwidth Product | 60MHz |
| Voltage Gain | 103dB |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Voltage - Input Offset | 400μV |
| Settling Time | 55 ns |
| -3db Bandwidth | 145MHz |
| Dual Supply Voltage | 9V |
| Input Capacitance | 2.1pF |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD8066ARM Overview
Op amp is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. This is a Voltage Feedback type op amp. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. The number of terminations approaches 8. A total of 8 pins are attached to buffer op amp. It should be noted that this op amp is a type of Operational Amplifier device. The buffer op amp includes 8 pins. Op amp ic rates 1.5mV for input offset voltage. This electrical part should be mounted using type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureUsing a supply current of 14.8mA , this buffer op amp will be able to operate. There should be no change in the voltage gain. As far as the device is concerned, buffer amplifier has 2 channels. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. In this case, FastFET? represents the instrumentation amplifiers' series number. There is an 7.4mA quiescent current in linear amplifier.
AD8066ARM Features
8 Pins
103dB voltage gain
Output Type: Rail-to-Rail
AD8066ARM Applications
There are a lot of Analog Devices Inc. AD8066ARM Instrumentational OP Amps applications.
- Wireless base stations
- Strain gauges
- Radiation thermometry transducers
- RF cable systems
- Ultrasound transducers
- Mobile phone
- Portable electronic products powered by batteries
- Integrator circuits
- single/dual op amp sum and difference circuits
- Automatic control
