AD8066ARZ-RL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | FastFET™ |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8066 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Operating Supply Current | 14.8mA |
| Nominal Supply Current | 14.8mA |
| Output Current | 35mA |
| Quiescent Current | 7.4mA |
| Slew Rate | 180V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 3pA |
| Voltage - Supply, Single/Dual (±) | 5V~24V ±2.5V~12V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Gain Bandwidth Product | 60MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 103dB |
| Average Bias Current-Max (IIB) | 0.000006μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Low-Offset | NO |
| Frequency Compensation | NO |
| Voltage - Input Offset | 400μV |
| Settling Time | 55 ns |
| Low-Bias | YES |
| -3db Bandwidth | 145MHz |
| Bias Current-Max (IIB) @25C | 0.000006μA |
| Dual Supply Voltage | 9V |
| Input Capacitance | 2.1pF |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8066ARZ-RL Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. Op amps are Voltage Feedback types of amplifier on the chip. The op amp is delivered to you in a Tape & Reel (TR) case. During the past two weeks, there have been close to 8 terminations. There are a total of 8 pins on this op amp. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. To be specific, this instrumentation amplifier is a type of Operational Amplifier. The op amp ic has an array of 8 pins on it. Op amp ic rates 1.5mV for input offset voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. An 14.8mA volt supply current is needed for this linear amplifier to operate. It is a member of the 103dB's 103dB family. There are 2 channels on the operational amplifiers. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The FastFET? indicates the series number of the op amp. Currently, linear amplifier is operating with a quiescent current of 7.4mA.
AD8066ARZ-RL Features
8 Pins
supply voltage of 5V
103dB voltage gain
Output Type: Rail-to-Rail
AD8066ARZ-RL Applications
There are a lot of Analog Devices Inc. AD8066ARZ-RL Instrumentational OP Amps applications.
- Micro signal measurement
- Test and measurement instruments
- High gain DC amplifier
- Logarithmic operation circuits
- Hand-held batteries
- ECG equipment
- Cinema or auditorium audio system
- Comparator
- Test equipment
- Active probe
