AD826ANZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | AD826 |
| Pin Count | 8 |
| Operating Supply Voltage | 28V |
| Number of Channels | 2 |
| Operating Supply Current | 15mA |
| Nominal Supply Current | 15mA |
| Quiescent Current | 7.5mA |
| Slew Rate | 350V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 3.3μA |
| Voltage - Supply, Single/Dual (±) | 5V~36V ±2.5V~18V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 50MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 20000 kHz |
| Voltage Gain | 72.04dB |
| Average Bias Current-Max (IIB) | 6.6μA |
| Power Supply Rejection Ratio (PSRR) | 86dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Settling Time | 70 ns |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 6.6μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1.5pF |
| Input Voltage Noise Density | 15nV/sqrt Hz |
| Height | 3.3mm |
| Length | 9.91mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD826ANZ Overview
A 8-DIP (0.300, 7.62mm) case is used to package the op amp. This is a Voltage Feedback type op amp. Instrumentation amplifier is delivered in a Tube case. There have been a total of 8 terminations over the past year. The total number of pins on linear amplifier is 8. Please take in mind that op amp should be run at 5V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. An 8-pin op amp ic is included in the package. Regarding input offset voltage, op amp rates 2mV. This electronic part is best mounted with type Through Hole. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 15mA and 10 . 72.04dB should remain the voltage gain. On the buffer amps, there are 2 channels that can be used. The operating supply voltage of the buffer op amp is rated at 28V. There is an 7.5mA quiescent current in linear amplifier.
AD826ANZ Features
8 Pins
supply voltage of 5V
72.04dB voltage gain
AD826ANZ Applications
There are a lot of Analog Devices Inc. AD826ANZ Instrumentational OP Amps applications.
- Comparator
- Precision measurement
- Industrial control system
- Portable electronic products powered by batteries
- Logarithmic operation circuits
- Test and measurement instruments
- Automation control systems
- Blood pressure sensors
- Polarized electrodes
- Test equipment
