AD827JRZ-16
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Max Power Dissipation | 1.5W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD827 |
| Pin Count | 16 |
| Number of Channels | 2 |
| Operating Supply Current | 13.5mA |
| Power Dissipation | 1.5W |
| Quiescent Current | 5.25mA |
| Slew Rate | 300V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 3.3μA |
| Voltage - Supply, Single/Dual (±) | ±4.5V~18V |
| Output Current per Channel | 32mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 50MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 35000 kHz |
| Voltage Gain | 70.88dB |
| Power Supply Rejection Ratio (PSRR) | 72dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 500μV |
| Settling Time | 120 ns |
| Bias Current-Max (IIB) @25C | 7μA |
| Dual Supply Voltage | 15V |
| Input Capacitance | 1.5pF |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Input Voltage Noise Density | 15nV/sqrt Hz |
| Height | 2.35mm |
| Length | 10.5mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD827JRZ-16 Overview
Packaging for the buffer amplifier is in the form of a 16-SOIC (0.295, 7.50mm Width) case. General Purpose-type instrumentation amplifiers are used in this application. Instrumentation amplifier is delivered in a Tube case. During the past two weeks, there have been close to 16 terminations. A total of 16 pins are attached to buffer op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. An 16-pin op amp ic is included in the package. Regarding input offset voltage, buffer amplifier rates 2mV voltage. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . Operational amplifier can operate supply current at 13.5mA. It is a member of the 70.88dB's 70.88dB family. As far as the device is concerned, buffer amplifier has 2 channels. The linear amplifier is packaged by using a TAPE AND REEL axis. Currently, linear amplifier is operating with a quiescent current of 5.25mA.
AD827JRZ-16 Features
16 Pins
supply voltage of 5V
70.88dB voltage gain
AD827JRZ-16 Applications
There are a lot of Analog Devices Inc. AD827JRZ-16 Instrumentational OP Amps applications.
- Industrial control system
- Exponential operation circuits
- Subtraction operation circuits
- Automotive sensors
- single/dual op amp sum and difference circuits
- Communication
- Micro signal measurement
- Band-pass filter
- Radar
- Comparator
