banner_page

AD834AQ

Lead, Tin 8 Analog Multiplier AD834 8 Pin 5V 8-CDIP (0.300, 7.62mm)


  • Manufacturer: Analog Devices Inc.
  • Nocochips NO: 84-AD834AQ
  • Package: 8-CDIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 357
  • Description: Lead, Tin 8 Analog Multiplier AD834 8 Pin 5V 8-CDIP (0.300, 7.62mm) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status PRODUCTION (Last Updated: 1 month ago)
Contact Plating Lead, Tin
Mount Through Hole
Package / Case 8-CDIP (0.300, 7.62mm)
Number of Pins 8
Packaging Tube
JESD-609 Code e0
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn63Pb37)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Subcategory Analog Computational Functions
Max Power Dissipation 500mW
Technology BIPOLAR
Terminal Position DUAL
Supply Voltage 5V
Base Part Number AD834
Function Analog Multiplier
Operating Supply Voltage 9V
Number of Elements 1
Temperature Grade INDUSTRIAL
Operating Supply Current 35mA
Output Current 4mA
Number of Bits 4
Accuracy 2 %
Max Input Voltage 1V
Bandwidth 500MHz
Neg Supply Voltage-Nom (Vsup) -5V
Max Dual Supply Voltage 9V
-3db Bandwidth 500MHz
Max Frequency 500MHz
Min Dual Supply Voltage 4V
High Level Output Current 4mA
Dual Supply Voltage 5V
Low Level Output Current 4mA
Positive Input Voltage-Max 1V
Number of Bits/Stages 4-Quadrant
Radiation Hardening No
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

AD834AQ Overview


Packing materials Tube are used.It is embedded in the 8-CDIP (0.300, 7.62mm) package for cost-effectiveness.There is a considerable amount of use of 4-Quadrant bits per stage.It operates at a voltage of 5V.This device is supplied with a nominally negative voltage of -5V.Radio-frequency signals modulated in the frequency range of 500MHz occupy the range of 500MHz.Several 8 terminations are available to ensure that signals do not reflect off the end of the transmission line.Electronic parts with a number of similarities can be found under its base part number AD834.A 8-pin electronic component is well known for its superior quality and performance in the industry.Electronics that fall under the subcategory Analog Computational Functions are included in this device.A PCB is mounted by the way of Through Hole.It is recommended that the device operate at a temperature of 85°C.A minimum operating temperature of -40°C should be maintained for the electronic device.As a result, it is ideal for a supply voltage of 35mA.A voltage higher than 4V should be used for the dual supply.It is recommended to use dual supply voltages less than 9V.A modulated radio-frequency signal falls within the frequency range of 500MHz.The device is capable of supporting the maximum voltage input of 1V, which allows designers to take full advantage of its flexibility.It operates with the dual supply voltage of 5V.Information can be stored in 4 bits.In order for it to operate, it must be supplied with a voltage of 9V.A number of 1 elements are incorporated into the design.In order to prevent failures, the frequency should not exceed 500MHz.A voltage-dependent control can be applied to the output current 4mA.

AD834AQ Features


Supplied in the 8-CDIP (0.300, 7.62mm) package
Bandwidth of 500MHz
Operating supply current of 35mA
Operating supply voltage of 9V

AD834AQ Applications


There are a lot of Analog Devices Inc. AD834AQ Analog Multipliers & Dividers applications.

  • pH (acidity)
  • Blood pressure sensors
  • Broadcasting
  • Signal transformation
  • Car stereo
  • Digital cameras
  • Inverse/same-phase proportional circuit
  • High-frequency data acquisition systems
  • Biopotential
  • Industrial applications including automation

Write a review

Note: HTML is not translated!
    Bad           Good