AD834JNZ
| Parameters | |
|---|---|
| Width | 7.24mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mount | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Analog Computational Functions |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Base Part Number | AD834 |
| Function | Analog Multiplier |
| Output Voltage | 9V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 9V |
| Min Supply Voltage | 4V |
| Operating Supply Current | 35mA |
| Nominal Supply Current | 28mA |
| Output Current | 4mA |
| Number of Bits | 4 |
| Accuracy | 2 % |
| Max Input Voltage | 1V |
| Bandwidth | 500MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Max Dual Supply Voltage | 9V |
| -3db Bandwidth | 500MHz |
| Max Frequency | 500MHz |
| Min Dual Supply Voltage | 4V |
| High Level Output Current | 4mA |
| Dual Supply Voltage | 5V |
| Low Level Output Current | 4mA |
| Number of Amplifiers | 2 |
| Positive Input Voltage-Max | 1V |
| Number of Bits/Stages | 4-Quadrant |
| Height | 3.43mm |
| Length | 9.27mm |
AD834JNZ Overview
Packing materials Tube are used.It is embedded in the 8-DIP (0.300, 7.62mm) package for cost-effectiveness.4-Quadrant bits per stage are frequently used.Powered by a voltage of 5V, it operates on a DC supply.A nominal negative supply voltage is provided for -5V.Radio-frequency signals modulated at 500MHz occupy the frequency range of 500MHz.Its base part number AD834 is associated with electronic parts that share a number of similarities.Known for its superior performance and high quality, it is a type of 8-pin electronic component.Under the subcategory of Analog Computational Functions, it is an electronic device.For mounting on the PCB, Through Hole is used.Electronic devices should be operated at a maximum temperature of 70°C.Electronic devices should be operated at a minimum temperature of 0°C.It is suitable for operating at a voltage of 35mA.There should be a higher dual supply voltage than 4V.If the dual supply voltage is lower than 9V, then it is recommended.Modulated radio-frequency signals occupy the frequency range of 500MHz.Due to its ability to support the maximum input voltage of 1V, designers are able to take full advantage of its flexibility.There is a dual supply voltage of 5V on which it operates.Information can be stored in 4 bits.A maximum supply voltage is limited at 9V.In order to maintain normal operation, the minimum supply voltage is set at 4V.Failures should not occur if the frequency exceeds 500MHz.As a result of working together, the 2 amplifiers provide high efficiency.It is 9V that is released from the output end.The circuitry employed to achieve its specific functions consists of 1 circuits.As a result, the output current 4mA can be controlled according to the input voltage.
AD834JNZ Features
Supplied in the 8-DIP (0.300, 7.62mm) package
Bandwidth of 500MHz
Operating supply current of 35mA
2 amplifiers
AD834JNZ Applications
There are a lot of Analog Devices Inc. AD834JNZ Analog Multipliers & Dividers applications.
- Thermocouples
- Test equipment
- Broadcasting
- Industrial applications including automation
- Band-stop filter
- Signal operation
- Television
- Communication
- single/dual op amp sum and difference circuits
- Industrial control system
