AD8370AREZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 16 |
| Weight | 172.98879mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 200Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Other Analog ICs |
| Max Power Dissipation | 575mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8370 |
| Pin Count | 16 |
| Output Type | Differential |
| Operating Supply Voltage | 5.5V |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 79mA |
| Nominal Supply Current | 78mA |
| Power Dissipation | 575mW |
| Slew Rate | 5750V/μs |
| Amplifier Type | Variable Gain |
| Common Mode Rejection Ratio | 77 dB |
| Current - Input Bias | 400pA |
| Voltage - Supply, Single/Dual (±) | 3V~5.5V |
| Input Offset Voltage (Vos) | 100μV |
| Bandwidth | 750MHz |
| Gain Bandwidth Product | 750MHz |
| Voltage Gain | 34dB |
| Gain | 34 dB |
| Noise Figure | 7.4 dB |
| Nominal Supply Voltage (DC) | 5.5V |
| Height | 1mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8370AREZ Overview
The linear amplifier is packaged in a 16-TSSOP (0.173, 4.40mm Width) Exposed Pad case. An op amp of this type is a Variable Gain-type. There is a Tube case that is delivered with the instrumentation amplifiers. The number of terminations is approaching the 16 mark. A total of 16 pins are located on this board. Please take in mind that op amp should be run at 5V. A type of Other Analog ICs op amp ic can be identified by the fact that this is a type of Other Analog ICs device. 16 pins are included on the operational amplifiers. In terms of the input offset voltage, instrumentation amplifier rates at 100μV. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. You can run this op amp ic on 79mA . 34dB should be the voltage gain. Op amp ic has 1 channels. One of its many advantages is that buffer op amp outputs Differential signals. The op amp is rated for an operating supply voltage of 2. The operating supply voltage of the buffer op amp is rated at 5.5V. It is recommended to keep the buffer amps resistance within the range of 200Ohm. The other type of analog IC used in this op amp ic is known as ANALOG CIRCUIT.
AD8370AREZ Features
16 Pins
supply voltage of 5V
34dB voltage gain
Output Type: Differential
Resistance of 200Ohm
AD8370AREZ Applications
There are a lot of Analog Devices Inc. AD8370AREZ Instrumentational OP Amps applications.
- High speed sample
- Television
- Fast A/D and D/A converters
- Vehicle electronics
- Information processing
- High input resistance broadband
- Multimedia playback equipment
- Precision measurement
- Proportional counter tubes
- Signal transformation
