AD8515AKSZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8515 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Channels | 1 |
| Operating Supply Current | 500μA |
| Quiescent Current | 500μA |
| Supply Current-Max | 0.6mA |
| Slew Rate | 2.7V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 50 dB |
| Current - Input Bias | 5pA |
| Voltage - Supply, Single/Dual (±) | 1.8V~5V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 6mV |
| Gain Bandwidth Product | 5MHz |
| Unity Gain BW-Nom | 5000 kHz |
| Voltage Gain | 126.02dB |
| Average Bias Current-Max (IIB) | 0.008μA |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 1mV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00003μA |
| Programmable Power | NO |
| Wideband | NO |
| Input Voltage Noise Density | 22nV/sqrt Hz |
| Length | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8515AKSZ-REEL Overview
Op amp is packaged in 5-TSSOP, SC-70-5, SOT-353 case. There are two types of operational amplifiers in this circuit. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. There have been a total of 5 terminations over the past year. In this case, there are 5 pins on the board. As a reminder, this buffer op amp should be powered by 3V battery and that the battery should be inserted in the amplifier. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. The buffer op amp includes 5 pins. With regard to input offset voltage, instrumentation amplifier is rated at 6mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureA supply current of 500μA can be used to operate this linear amplifier. 126.02dB should be the voltage gain. 1 channels are available on the instrumentation amplifier. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. The operating supply voltage of the buffer op amp is rated at 3V. The instrumentation amplifier is packed in the form of TAPE AND REEL. There is an 500μA quiescent current in linear amplifier.
AD8515AKSZ-REEL Features
5 Pins
supply voltage of 3V
126.02dB voltage gain
Output Type: Rail-to-Rail
AD8515AKSZ-REEL Applications
There are a lot of Analog Devices Inc. AD8515AKSZ-REEL Instrumentational OP Amps applications.
- Portable media players
- Signal operation
- Medical instruments
- Video amplifiers
- Home audio systems
- Oscilloscopes
- Weighing systems
- Ultrasound transducers
- Strain gauges
- Portable electronic products powered by batteries
