AD8542ARZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8542 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Channels | 2 |
| Operating Supply Current | 130μA |
| Output Current | 30mA |
| Quiescent Current | 65μA |
| Supply Current-Max | 0.17mA |
| Min Input Voltage | 2.7V |
| Slew Rate | 0.92V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 45 dB |
| Current - Input Bias | 4pA |
| Max Input Voltage | 5.5V |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 6mV |
| Bandwidth | 1MHz |
| Unity Gain BW-Nom | 980 kHz |
| Voltage Gain | 92.04dB |
| Average Bias Current-Max (IIB) | 0.001μA |
| Power Supply Rejection Ratio (PSRR) | 76dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 1mV |
| Settling Time | 6 μs |
| Low-Bias | YES |
| Micropower | YES |
| Max Frequency | 10kHz |
| Bias Current-Max (IIB) @25C | 0.00006μA |
| Input Voltage Noise Density | 42nV/sqrt Hz |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8542ARZ-REEL7 Overview
There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. The instrumentation amplifier in this picture is of the General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 8 terminations this year. There are a total of 8 pins on this op amp. I would like to remind you that this buffer op amp should be powered by an 3V battery. Instrumentation amplifier is a part of Operational Amplifier. There are 8 pins on this chip. In terms of input offset voltage, operational amplifier rates 6mV. This electrical part should be mounted using type Surface Mount. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. The buffer amplifier is capable of operating from a supply current of 130μA . There should be no change in the voltage gain at 92.04dB. The op amp ic has 2 channels on it. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 5V voltage. TAPE AND REEL is adopted to pack the instrumentation amplifier. There is a quiescent current of 65μA in this operational amplifier circuit.
AD8542ARZ-REEL7 Features
8 Pins
supply voltage of 3V
92.04dB voltage gain
Output Type: Rail-to-Rail
AD8542ARZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8542ARZ-REEL7 Instrumentational OP Amps applications.
- High-frequency data acquisition systems
- Thermocouples
- Weighing systems
- Biopotential
- Professional videography
- Industrial applications including automation
- Radiation thermometry transducers
- Digital cameras
- Automotive sensors
- Integrator circuits
