Parameters |
Contact Plating |
Lead, Tin |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
with Latch |
Subcategory |
Comparator |
Max Power Dissipation |
50mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
1 |
Supply Voltage |
3V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
AD8611 |
Pin Count |
8 |
Output Type |
Complementary, TTL |
Number of Elements |
1 |
Power Supplies |
3/5V |
Nominal Supply Current |
10mA |
Power Dissipation |
50mW |
Max Supply Current |
10mA |
Propagation Delay |
5.5 ns |
Quiescent Current |
4mA |
Turn On Delay Time |
5.5 ns |
Response Time |
4.5 ns |
Common Mode Rejection Ratio |
85 dB |
Voltage - Supply, Single/Dual (±) |
3V~5V |
Output Current per Channel |
10mA |
Input Offset Voltage (Vos) |
7mV |
Voltage Gain |
69.54dB |
Average Bias Current-Max (IIB) |
4μA |
Power Supply Rejection Ratio (PSRR) |
73dB |
Supply Voltage Limit-Max |
7V |
Input Bias Current |
6μA |
Current - Quiescent (Max) |
10mA 4mA |
Voltage - Input Offset (Max) |
7mV @ 5V |
Current - Input Bias (Max) |
6μA @ 5V |
CMRR, PSRR (Typ) |
85dB CMRR, 73dB PSRR |
Length |
4.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
AD8611AR Overview
In order to facilitate transportation, it is packaged in 8-SOIC (0.154, 3.90mm Width) .There is a Complementary, TTL output type for this comparator.Electronic comparator is shipped by Tube .The comparator has a total of 8 terminals.The chip belongs to Comparator .A comparator is capable of completing a variety of demanding tasks when supplied with 3V voltage.It's a typical with Latch comparator.Electronic comparator has a total of 1 elements.The pinout of the component starts from 8 pins it has.Electronic comparator is recommended to mount using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .The comparator has 8 pins.You can search AD8611 if you are looking for more pin-to-pin solutions.As a result, this comparator displays a quiescent current of 4mA .Normal operation of the device requires 10mA supply current.A supply current exceeding 10mA may result in the comparator malfunctioning.There is sufficient power to run the device from 3/5V power supplies.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 69.54dB .
AD8611AR Features
Complementary, TTL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 4mA
Voltage Gain: 69.54dB
AD8611AR Applications
There are a lot of Analog Devices Inc. AD8611AR linear comparators applications.
- Building automation
- Point of load regulators
- Notebooks and PDAs
- Threshold Detectors
- Battery management and protection
- Security Detection Systems
- Self-diagnostics
- Factory automation & control
- High-Speed Differential Line Receiver
- Window Comparators