AD8639WARZ-RL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8639 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Operating Supply Current | 3mA |
| Quiescent Current | 1.5mA |
| Supply Current-Max | 3.4mA |
| Slew Rate | 2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 142 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 5V~16V ±2.5V~8V |
| Output Current per Channel | 37mA |
| Input Offset Voltage (Vos) | 9μV |
| Gain Bandwidth Product | 1.5MHz |
| Unity Gain BW-Nom | 1350 kHz |
| Voltage Gain | 136dB |
| Average Bias Current-Max (IIB) | 0.000105μA |
| Power Supply Rejection Ratio (PSRR) | 143dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16V |
| Voltage - Input Offset | 3μV |
| Settling Time | 4 μs |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.000075μA |
| Programmable Power | NO |
| Screening Level | AEC-Q100 |
| Input Capacitance | 1.7pF |
| Wideband | NO |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8639WARZ-RL Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. An op amp of this type is a Zero-Drift-type. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. During the past two weeks, there have been close to 8 terminations. There are a total of 8 pins on this op amp. Please take in mind that op amp should be run at 5V. Instrumentation amplifier is a part of Operational Amplifier. An 8-pin op amp ic is included in the package. The input offset voltage is 9μV. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . It is possible to operate this buffer amplifier from a supply current of 3mA . There should be no change in the voltage gain. 2 channels are available on the instrumentation amplifier. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted. Automotive corresponds to the op amp's series. Currently, linear amplifier is operating with a quiescent current of 1.5mA.
AD8639WARZ-RL Features
8 Pins
supply voltage of 5V
136dB voltage gain
Output Type: Rail-to-Rail
AD8639WARZ-RL Applications
There are a lot of Analog Devices Inc. AD8639WARZ-RL Instrumentational OP Amps applications.
- Band-pass filter
- Blood pressure sensors
- Image computer boards
- High speed sample
- Polarized electrodes
- Communication device
- Non-polarized electrodes
- Power generator
- E-book readers
- Addition operation circuits
