AD8641AKSZ-R2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | JFET |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8641 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 24V |
| Number of Channels | 1 |
| Operating Supply Current | 290μA |
| Quiescent Current | 290μA |
| Supply Current-Max | 0.33mA |
| Slew Rate | 3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 107 dB |
| Current - Input Bias | 0.25pA |
| Voltage - Supply, Single/Dual (±) | 5V~26V ±2.5V~13V |
| Output Current per Channel | 12mA |
| Input Offset Voltage (Vos) | 750μV |
| Bandwidth | 3.5MHz |
| Neg Supply Voltage-Nom (Vsup) | -13V |
| Unity Gain BW-Nom | 3500 kHz |
| Voltage Gain | 102.92dB |
| Average Bias Current-Max (IIB) | 0.00026μA |
| Power Supply Rejection Ratio (PSRR) | 107dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 70μV |
| Low-Bias | YES |
| Micropower | YES |
| Input Voltage Noise Density | 28.5nV/sqrt Hz |
| Height | 900μm |
| Length | 2mm |
| Width | 1.25mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8641AKSZ-R2 Overview
There is a 5-TSSOP, SC-70-5, SOT-353 case package that contains the instrumentation amplifiers. An op amp ic of the J-FET type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. The number of terminations approaches 5. In this case, there are 5 pins on the board. This linear amplifier should be powered by an 13V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 5 pins are available on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 750μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. It is possible to operate this buffer amplifier from a supply current of 290μA . You should keep the voltage gain at 102.92dB for the time being. There are a total of 1 channels available on the op amps. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The operating supply voltage of instrumentation amplifier is rated 24V voltage. There is an 290μA quiescent current running through op amp ic.
AD8641AKSZ-R2 Features
5 Pins
supply voltage of 13V
102.92dB voltage gain
Output Type: Rail-to-Rail
AD8641AKSZ-R2 Applications
There are a lot of Analog Devices Inc. AD8641AKSZ-R2 Instrumentational OP Amps applications.
- PDA
- Signal operation
- Multimedia playback equipment
- Car stereo
- Communication
- E-book readers
- Radiation thermometry transducers
- Portable electronic products powered by batteries
- Gaming industry
- Signal amplification
